Original file
Original / Factory · Diesel · 280 CDI 190hp
MB ML 280 CDI original file Bosch · SW 393883
Mercedes-Benz ML 280 CDI 139.7 kW (190 HP) Original2004, 139.7 kW (190 hp)
190 HP Factory calibration Stock backup file, 440 Nm, Diesel
Calibrated ECU file for (SW 393883). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 280 CDI 190hp, M642.940, Diesel. Engine #14474 in our gains database.
- Power
- 190 HPfactory calibration
- Torque
- 440 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware EDC16 and software 393883.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Ml 280 |
| Model year | 2004 |
| Fuel / Induction | CDI (Turbo Diesel) |
| Factory power | 139.7 kW (190 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | EDC16 |
| ECU software | 393883 |
| Calibration stage | Original (Factory) |
| OEM engine code | M642.940 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 190 HP | 440 Nm | — | — |
| Stage 1 | 260 HP | 600 Nm | +70 (36.8%) | +160 |
| Stage 2 | 270 HP | 647 Nm | +80 (42.1%) | +207 |
| Stage 3 | 285 HP | 682 Nm | +95 (50%) | +242 |
| Stage 4 | 342 HP | 814 Nm | +152 (80%) | +374 |
About this calibration file
This is the factory (original) ECU calibration for the 2004 Mercedes-Benz Ml 280 CDI (Turbo Diesel), extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number EDC16 and software version 393883. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
EDC16 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB ML 280 CDI 2004 139.7KW with Bosch EDC16 (Bosch software number 393883 ( 1037393883 )). This original file corresponds to a factory engine output of approximately 139.7 kW (~190 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as EDC16, 393883 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E5EF1602 72742C01 BD89C811 A26CB210 CBB275FB 7D3DAEA5 B86D2D2B B30BE0BA