Original file
Original / Factory · Diesel · 250 CDI 204hp
MB E300 300CDI original file Bosch · SW 512434
Mercedes-Benz E300 300CDI 150 kW (204 HP) Original2010, 150 kW (204 hp)
204 HP Factory calibration Stock backup file, 500 Nm, Diesel
Calibrated ECU file for (SW 512434). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 250 CDI 204hp, OM 651 DE 22 La red., 2.1L, Diesel. Engine #4710 in our gains database.
- Power
- 204 HPfactory calibration
- Torque
- 500 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware CR6EU5 and software 512434.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | E300 300cdi |
| Model year | 2010 |
| Factory power | 150 kW (204 HP) |
| ECU manufacturer | Bosch |
| ECU ID | CR6EU5-642-49D1-CH4 |
| ECU hardware | NNW-212SA-150KW-EU5OP-015 |
| ECU software | 512434 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2143 CC |
| Compression ratio | 16,2 : 1 |
| Bore × Stroke | 83,0 X 99,0 mm |
| OEM engine code | OM 651 DE 22 La red. |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 204 HP | 500 Nm | — | — |
| Stage 1 | 240 HP | 560 Nm | +36 (17.6%) | +60 |
| Stage 2 | 252 HP | 582 Nm | +48 (23.5%) | +82 |
| Stage 3 | 306 HP | 775 Nm | +102 (50%) | +275 |
| Stage 4 | 367 HP | 925 Nm | +163 (79.9%) | +425 |
About this calibration file
This is the factory (original) ECU calibration for the 2010 Mercedes-Benz E300 300cdi, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number NNW-212SA-150KW-EU5OP-015 and software version 512434. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
NNW-212SA-150KW-EU5OP-015 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB E300 300CDI 2010 150KW with Bosch CR6EU5-642-49D1-Ch4 and software ID nNW-212SA-150kW-EU5OP-015 (Bosch software number 512434 ( 1037512434 )). This original file corresponds to a factory engine output of approximately 150 kW (~204 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as CR6EU5-642-49D1-Ch4, nNW-212SA-150kW-EU5OP-015, 512434 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
8248B887 2C5686CF 53E0398E A7004F0E 3FC0D354 81916B48 5B056175 3B5B99DE