Stage 2
MB E 300 TD Stage 2 file Bosch HW 0281001624
Mercedes-Benz E 300 TD Turbo Diesel 130.2 kW (177 HP) Stage 21997, Turbo diesel, 130.2 kW (177 hp)
Calibrated ECU file for 0281001624 (SW 357710). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281001624.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | E 300 Td |
| Model year | 1997 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 130.2 kW (177 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 357710-711 |
| ECU hardware | 0281001624 |
| Calibration stage | Stage 2 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
About this calibration file
The Stage 2 calibration for the 1997 Mercedes-Benz E 300 Td Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU with hardware number 0281001624. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281001624 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for MB E 300 TD 1997 Turbodiesel 130.2KW with Bosch 0281001624. The base stock vehicle for this calibration has a factory output of around 130.2 kW (~177 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281001624. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
EBFA7680 E4D458A9 7BAA9741 A3804772 CB420EAA FB5E6C26 47AA9675 66E38067