Stage 1
Stage 1 · Diesel · 200d - 150hp
MB C 220CDI Stage 1 file Bosch · SW 362819
Mercedes-Benz C 220CDI Turbo Diesel 110.3 kW (150 HP) Stage 12006, Turbo diesel, 110.3 kW (150 hp)
150 → 200 HP +50 HP +120 Nm 33% more power
Calibrated ECU file for (SW 362819). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 200d - 150hp, 2L, Diesel. Engine #4546 in our gains database.
- Power
- 200 HP+50 HP from 150
- Torque
- 440 Nm+120 Nm from 320
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 362819 and software 362819.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | C 220cdi |
| Model year | 2006 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 110.3 kW (150 HP) |
| ECU manufacturer | Bosch |
| ECU software | 362819 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1950 CC |
| Compression ratio | 15,5 : 1 |
| Bore × Stroke | 82,0 X 92,3 mm |
| OEM engine code | 200d - 150hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 150 HP | 320 Nm | — | — |
| Stage 1 | 200 HP | 440 Nm | +50 (33.3%) | +120 |
| Stage 2 | 210 HP | 458 Nm | +60 (40%) | +138 |
| Stage 3 | 225 HP | 496 Nm | +75 (50%) | +176 |
| Stage 4 | 270 HP | 592 Nm | +120 (80%) | +272 |
About this calibration file
The Stage 1 calibration for the 2006 Mercedes-Benz C 220cdi Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU and software version 362819. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 200 HP and 440 Nm at the crank — a gain of +50 HP (33%) and +120 Nm over the factory 150 HP / 320 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for MB C 220CDI 2006 Turbodiesel 110.3KW with Bosch 362819. The base stock vehicle for this calibration has a factory output of around 110.3 kW (~150 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 362819. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
16C43EB5 B1C9169D 3E3ED950 86375473 40939D35 9C2DFFEF D3D747E0 790B5DC3