Original file
Original / Factory · Diesel · 180 CDI 109hp
MB B 180cdi original file Bosch · SW 510890
Mercedes-Benz B 180cdi 80.2 kW (109 HP) Original2010, 80.2 kW (109 hp)
109 HP Factory calibration Stock backup file, 250 Nm, Diesel
Calibrated ECU file for (SW 510890). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 180 CDI 109hp, M640.940, 2L, Diesel. Engine #4530 in our gains database.
- Power
- 109 HPfactory calibration
- Torque
- 250 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 169WM and software 510890.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | B 180cdi |
| Model year | 2010 |
| Factory power | 80.2 kW (109 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | CR40-640-62AA-169WM-080KW-EU5DPF-002 |
| ECU software | 510890 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1991 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 83,0 X 92,0 mm |
| OEM engine code | M640.940 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 109 HP | 250 Nm | — | — |
| Stage 1 | 131 HP | 305 Nm | +22 (20.2%) | +55 |
| Stage 2 | 138 HP | 317 Nm | +29 (26.6%) | +67 |
| Stage 3 | 164 HP | 388 Nm | +55 (50.5%) | +138 |
| Stage 4 | 196 HP | 463 Nm | +87 (79.8%) | +213 |
About this calibration file
This is the factory (original) ECU calibration for the 2010 Mercedes-Benz B 180cdi, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number CR40-640-62AA-169WM-080KW-EU5DPF-002 and software version 510890. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
CR40-640-62AA-169WM-080KW-EU5DPF-002 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB B 180cdi 2010 80.2KW with Bosch CR40-640-62AA-169WM-080kW-EU5DPF-002 and software ID ME03 (Bosch software number 510890 ( 1037510890 )). This original file corresponds to a factory engine output of approximately 80.2 kW (~109 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as CR40-640-62AA-169WM-080kW-EU5DPF-002, ME03, 510890 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
29E7638D 21FA7780 4A344F94 638EB14F C00A856A 1F0EAD5A 92C3B641 4C8788D3