Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
Land Rover Range Rover III (L322)
  1. Home
  2. I need a file
  3. ECU files
  4. Land Rover
  5. Land Rover Range Rover

Instant download

Land Rover Range Rover TD6 original file Siemens HW 5WS40061F-T · LP0B1A8000000

2005 · Turbo diesel · 190 hp (140 kW)

Share WhatsApp Facebook

Land Rover Range Rover III (L322) 2002–2012

Dyno sheet

Power
190 hp
Torque
440 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.00751501503002254503006001000200030004000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 2.7 TDV6. Results depend on the car's condition, fuel and parts.

Power
190 hp 140 kW
ECU
Siemens
Engine
2.7 TDV6 Turbo diesel · 2,720 cc · 6 cyl
File
2 MB BIN, ready to write

Siemens on the Land Rover Range Rover TD6

Software and hardware

Hardware
5WS40061F-T Siemens's number for the ECU itself, on its label
Software ID
LP0B1A8000000 The software's own ID, in the file

Check your read against this file

How the Siemens is read: OBD and Bench

  • OBD
  • Bench
  • FLEX
  • CMD Flash
  • New Genius

Older tools

  • KESS V2

Built on request for the Land Rover Range Rover TD6

  • DPF off
  • EGR off
  • DTC off
  • Speed limiter (Vmax) off
  • Swirl flaps off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 5WS40061F and software ID LP0B1A8000000
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 5WS40061F-T and software ID LP0B1A8000000, the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2005 Land Rover Range Rover TD6 (140 kW, 190 hp), for its Siemens ECU with hardware 5WS40061F-T and software ID LP0B1A8000000. Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: injection quantity and timing, boost and rail pressure, the torque and smoke limiters, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The Land Rover Range Rover TD6 carries the 2.7 TDV6 engine, 190 hp and 440 Nm from the factory. On this engine, Stage 1 usually gives about 240 hp and 520 Nm (+50 hp, +80 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For this calibration of the Land Rover Range Rover TD6 we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

The Siemens ECU in this car is read and written over OBD and on the bench, with tools such as MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 5WS40061F-T is the number on the Siemens ECU's label. Software ID LP0B1A8000000 names that calibration in your tool's read.

Questions

Which ECU does this Land Rover Range Rover TD6 original file fit?

A Siemens ECU with hardware 5WS40061F-T and software ID LP0B1A8000000. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Siemens ECU read and written?

Over OBD and on the bench, with tools such as MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the Land Rover Range Rover TD6?

Usually about 240 hp and 520 Nm against 190 hp and 440 Nm stock (+50 hp, +80 Nm). Typical for a healthy engine, never a promise for one car.

Can you add DPF off and EGR off to the Siemens ECU file?

Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read