Original file
Original / Factory · Diesel · 3.6 TDV8 Autobiography DPF 272hp
Land Rover Range Rover 3.6 L V8 original file Siemens
Land Rover Range Rover 3.6 L V8 Turbo Diesel 205.2 kW (279 HP) Original2007, Turbo diesel, 205.2 kW (279 hp)
272 HP Factory calibration Stock backup file, 640 Nm, Diesel
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 3.6 TDV8 Autobiography DPF 272hp, 368DT, 3.6L, Diesel. Engine #13882 in our gains database.
- Power
- 272 HPfactory calibration
- Torque
- 640 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware LP14044000000.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Land Rover |
|---|---|
| Vehicle model | Range Rover |
| Model year | 2007 |
| Displacement | 3.6 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 205.2 kW (279 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | LP14044000000 |
| Calibration stage | Original (Factory) |
| OEM engine code | 368DT |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 272 HP | 640 Nm | — | — |
| Stage 1 | 302 HP | 740 Nm | +30 (11%) | +100 |
| Stage 2 | 386 HP | 941 Nm | +114 (41.9%) | +301 |
| Stage 3 | 408 HP | 992 Nm | +136 (50%) | +352 |
| Stage 4 | 490 HP | 1184 Nm | +218 (80.1%) | +544 |
About this calibration file
This is the factory (original) ECU calibration for the 2007 Land Rover Range Rover 3.6L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Siemens ECU with hardware number LP14044000000. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
LP14044000000 (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Land Rover Range Rover 3.6 L V8 2007 Turbodiesel 205.2KW with Siemens LP14044000000. This original file corresponds to a factory engine output of approximately 205.2 kW (~279 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as LP14044000000. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
14C618D6 75CAEC35 EB66CA11 C1BCE394 5878825E 714FE865 8F4E455E 4C5671F0