Stage 1
Stage 1 · Diesel · 2.5 TD5 137hp
Land Rover Discovery 2.5TD5 Stage 1 file
Land Rover Discovery 2.5TD5 Turbo Diesel 102.2 kW (139 HP) Stage 12006, Turbo diesel, 102.2 kW (139 hp)
137 → 160 HP +23 HP +50 Nm 17% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.5 TD5 137hp, 16P, 2.5L, Diesel. Engine #4076 in our gains database.
- Power
- 160 HP+23 HP from 137
- Torque
- 350 Nm+50 Nm from 300
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
The numbers in your read must be the ones listed on this page.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Land Rover |
|---|---|
| Vehicle model | Discovery 2 5td5 |
| Model year | 2006 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 102.2 kW (139 HP) |
| Calibration stage | Stage 1 |
| Cylinder capacity | 2495 CC |
| Compression ratio | 19,5 : 1 |
| Bore × Stroke | 84,5 X 89,0 mm |
| OEM engine code | 16P |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 137 HP | 300 Nm | — | — |
| Stage 1 | 160 HP | 350 Nm | +23 (16.8%) | +50 |
| Stage 2 | 168 HP | 364 Nm | +31 (22.6%) | +64 |
| Stage 3 | 206 HP | 465 Nm | +69 (50.4%) | +165 |
| Stage 4 | 247 HP | 555 Nm | +110 (80.3%) | +255 |
About this calibration file
The Stage 1 calibration for the 2006 Land Rover Discovery 2 5td5 Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a OEM ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 160 HP and 350 Nm at the crank — a gain of +23 HP (17%) and +50 Nm over the factory 137 HP / 300 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for Land Rover Discovery 2.5TD5 2006 Turbodiesel 102.2KW . The base stock vehicle for this calibration has a factory output of around 102.2 kW (~139 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number the ECU part number in the product title.Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
7794BF3B F7AD0C03 ED9AB6A9 D0B39130 C2C1B24B 0F1238C9 22620FC5 AD0D8459