Original file
Original / Factory · Diesel · 1.6 CRDI 115hp
Kia Sportage 1.7 CRDi original file Bosch · SW 515128
Kia Sportage 1.7 CRDi Turbo Diesel 85.3 kW (116 HP) OriginalTurbo diesel, 85.3 kW (116 hp)
115 HP Factory calibration Stock backup file, 280 Nm, Diesel
Calibrated ECU file for (SW 515128). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.6 CRDI 115hp, 1.6L, Diesel. Engine #3931 in our gains database.
- Power
- 115 HPfactory calibration
- Torque
- 280 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 515128 and software 515128.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Kia |
|---|---|
| Vehicle model | Sportage |
| Displacement | 1.7 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 85.3 kW (116 HP) |
| ECU manufacturer | Bosch |
| ECU software | 515128 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1598 CC |
| Compression ratio | 16,0 : 1 |
| Bore × Stroke | 77,0 X 85,8 mm |
| OEM engine code | 1.6 CRDI 115hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 115 HP | 280 Nm | — | — |
| Stage 1 | 145 HP | 320 Nm | +30 (26.1%) | +40 |
| Stage 2 | 152 HP | 333 Nm | +37 (32.2%) | +53 |
| Stage 3 | 173 HP | 434 Nm | +58 (50.4%) | +154 |
| Stage 4 | 207 HP | 518 Nm | +92 (80%) | +238 |
About this calibration file
This is the factory (original) ECU calibration for the Kia Sportage 1.7L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU and software version 515128. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a complete original ECU backup (stock file) for Kia Sportage 1.7 CRDi Turbo-Diesel 85.3KW with Bosch 515128. This original file corresponds to a factory engine output of approximately 85.3 kW (~116 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 515128. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
A370B115 EF866C42 44FB1283 5FB5D685 D9812FC2 441CCAE3 D0113D6C 854C995A