Stage 3
Stage 3 · Diesel · 2.2 CRDi 197hp
Kia Sorento 2.2 CRDi Stage 3 file Bosch · SW 508189
Kia Sorento 2.2 CRDi Turbo Diesel 135.3 kW (184 HP) Stage 3Turbo diesel, 135.3 kW (184 hp)
197 → 296 HP +99 HP +237 Nm 50% more power
Calibrated ECU file for (SW 508189). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.2 CRDi 197hp, D4HB, 2.2L, Diesel. Engine #3908 in our gains database.
- Power
- 296 HP+99 HP from 197
- Torque
- 667 Nm+237 Nm from 430
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 508189 and software 508189.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 3, Diesel.
Hardware
- Hybrid or larger turbocharger
- Upgraded injectors (matched flow rate)
- Front-mount intercooler upgrade
- Sport / decat downpipe + free-flow exhaust
- High-flow air intake
- Uprated clutch (manual gearbox)
Software / calibration
- Custom map dialled to the installed turbo, injector and intercooler spec
- Boost, fuelling, ignition / injection timing rebuilt around the new hardware
- All safety limits (knock, EGT, lambda, rail) re-tuned to match
- Drivability and torque-by-gear shaped to match the hardware
Stage 3 is hardware-matched. Send your turbo / injector / intercooler / clutch spec at checkout so the file is calibrated to YOUR build: typical projection above is a guide, final dyno depends on installed hardware.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Kia |
|---|---|
| Vehicle model | Sorento |
| Displacement | 2.2 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 135.3 kW (184 HP) |
| ECU manufacturer | Bosch |
| ECU software | 508189 |
| Calibration stage | Stage 3 |
| OEM engine code | D4HB |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 197 HP | 430 Nm | — | — |
| Stage 1 | 225 HP | 500 Nm | +28 (14.2%) | +70 |
| Stage 2 | 236 HP | 520 Nm | +39 (19.8%) | +90 |
| Stage 3 | 296 HP | 667 Nm | +99 (50.3%) | +237 |
| Stage 4 | 355 HP | 796 Nm | +158 (80.2%) | +366 |
About this calibration file
The Stage 3 calibration for the Kia Sorento 2.2L Turbo Diesel targets a hardware-upgraded setup — hybrid or larger turbocharger, upgraded injectors, high-flow fuelling and in most cases a full exhaust. Maps are redrawn for the new airflow envelope with re-scaled MAF/MAP, torque limiters, smoke limiters and boost PID re-tuned.
This file matches a Bosch ECU and software version 508189. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 296 HP and 667 Nm at the crank — a gain of +99 HP (50%) and +237 Nm over the factory 197 HP / 430 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage3 tuning file for Kia Sorento 2.2 CRDi Turbo-Diesel 135.3KW with Bosch 508189. The base stock vehicle for this calibration has a factory output of around 135.3 kW (~184 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 508189. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
610F42A7 37EE29C7 E368FB3D 6FF8DEBA 325E78E3 1036E4D1 0BC19F01 754FC4FE