Stage 1
Stage 1 · Petrol · 1.4 T-GDi 140hp
Kia Ceed 2.0 Stage 1 file Bosch · SW 393090
Kia Ceed 2.0 Petrol 103 kW (140 HP) Stage 12009, Petrol, 103 kW (140 hp)
140 → 175 HP +35 HP +68 Nm 25% more power
Calibrated ECU file for (SW 393090). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.4 T-GDi 140hp, 1.4L, Petrol. Engine #3846 in our gains database.
- Power
- 175 HP+35 HP from 140
- Torque
- 310 Nm+68 Nm from 242
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Bosch and software 393090.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Kia |
|---|---|
| Vehicle model | Ceed |
| Model year | 2009 |
| Displacement | 2.0 L |
| Fuel / Induction | Petrol |
| Factory power | 103 kW (140 HP) |
| ECU manufacturer | Bosch |
| ECU software | 393090 |
| Calibration stage | Stage 1 |
| OEM engine code | 1.4 T-GDi 140hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 140 HP | 242 Nm | — | — |
| Stage 1 | 175 HP | 310 Nm | +35 (25%) | +68 |
| Stage 2 | 186 HP | 326 Nm | +46 (32.9%) | +84 |
| Stage 3 | 231 HP | 375 Nm | +91 (65%) | +133 |
| Stage 4 | 273 HP | 448 Nm | +133 (95%) | +206 |
About this calibration file
The Stage 1 calibration for the 2009 Kia Ceed 2.0L Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU and software version 393090. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 175 HP and 310 Nm at the crank — a gain of +35 HP (25%) and +68 Nm over the factory 140 HP / 242 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for Kia Ceed 2.0 2009 Benzin 103KW with Bosch Bosch (Bosch software number 393090 ( 1037393090 )). The base stock vehicle for this calibration has a factory output of around 103 kW (~140 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Bosch, 393090 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
60CBD486 1213B50B DF43724B 9881C4C2 C32EA6A4 10B81827 20127EDD CF131928