STAGE 2 Diesel 2.9 CRDi 144hp

Kia Carnival 2.9 CRDi Turbo Diesel 105.9 kW (144 HP) Stage 2

050100150200 10002000300040005000 179 HP +35 385 Nm +75 HP Nm RPM 0100200300400
Stock Stage 2 HP / Nm projection
144 179 HP
+35 HP +75 Nm 24% more power

Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #4230 · Gains DB TYPICAL PROJECTION
MATCHED ENGINE 2.9 CRDi 144hp J3 2.9L Diesel Stage 2
050100150200 10002000300040005000 179 HP +35 385 Nm +75 HP Nm RPM 0100200300400
Stock Stage 2 HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear
Required Modifications Stage 2 · Diesel
Hardware
  • Sport / decat downpipe (or DPF removal where legally permitted off-road)
  • High-flow air intake (recommended)
  • Optional: catback exhaust for lower backpressure
Software / Calibration
  • DPF / EGR / AdBlue switched off in software (where lawful)
  • Boost & rail pressure raised to match new airflow
  • Smoke limiter relaxed in line with hardware
  • Lambda + EGT safeties retuned

Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make Kia
Vehicle model Carnival
Model year 2002
Displacement 2.9 L
Fuel / Induction Turbo Diesel
Factory power 105.9 kW (144 HP)
ECU manufacturer Delphi
ECU hardware 39102452
Calibration stage Stage 2
Cylinder capacity 2902 CC
Compression ratio 19,3 : 1
Bore × Stroke 97,1 X 99,0 mm
OEM engine code J3
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

Engine performance matrix

Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.

Engine2.9 CRDi 144hp CodeJ3 Displacement2.9L Capacity2902 CC Compression19,3 : 1 Bore × Stroke97,1 X 99,0 mm FuelDiesel Engine ID#4230
Stage Power Torque Δ HP Δ Nm
Original / Factory 144 HP 310 Nm — —
Stage 1 170 HP 370 Nm +26 (18.1%) +60
Stage 2 179 HP 385 Nm +35 (24.3%) +75
Stage 3 216 HP 481 Nm +72 (50%) +171
Stage 4 259 HP 574 Nm +115 (79.9%) +264
Fuel economy gain (vs. factory map, same driving profile): combined cycle −8% , full-load cruise −12%. Diesel calibrations typically net bigger combined-cycle savings thanks to shorter duty-cycle on low-load driving.

About this calibration file

The Stage 2 calibration for the 2002 Kia Carnival 2.9L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.

This file matches a Delphi ECU with hardware number 39102452. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

Projected output on a healthy, stock-hardware example of this engine: 179 HP and 385 Nm at the crank — a gain of +35 HP (24%) and +75 Nm over the factory 144 HP / 310 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware 39102452 (Delphi) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

Stage 2 benefits from a higher-flow downpipe or sports catalyst, an upgraded intercooler on forced-induction engines, and in some cases a cooler intake. The map will run on stock hardware but will not reach the quoted figures without the supporting bolt-ons.

Re-flashing the ECU leaves a flag that a franchised Kia dealer can detect with their diagnostic tool. Most markets treat this as a basis to deny powertrain warranty claims that the modification could have caused. Emissions-sensitive components (DPF, EGR, SCR) remain fully functional with this calibration — we do not remove, disable or alter any emissions hardware.

The power and torque numbers on this page are healthy-engine crank figures. On a well-maintained 2002 Kia Carnival running a known-good fuel brand, you should see a clearly perceptible increase in mid-range pull — typically from 1,800 to 4,000 rpm on diesel, 2,500 to 6,000 rpm on petrol — along with a shorter 80-to-120 km/h in-gear time. Thermal performance and fuel consumption depend on how you drive post-tune.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.

This product contains a calibrated Stage2 tuning file for Kia Carnival 2.9 CRDi 2002 Turbodiesel 105.9KW with Delphi 39102452 and software ID R410C045B. The base stock vehicle for this calibration has a factory output of around 105.9 kW (~144 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 39102452, R410C045B. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprint88E0F08A 950298B3 D5C5525A 930FC6A4 A0F38F15 B809297D 34C7E7D3 0C97F6DF

Same engine — other calibrations

Alternative stages for the same ECU: Kia family