ORIGINAL / FACTORY Diesel 2.8 CRD 200hp

Jeep Wrangler 2.8CRD 147.1 kW (200 HP) Original

050100150200 10002000300040005000 200 HP +0 410 Nm +0 HP Nm RPM 0100200300400
Stock Original / Factory HP / Nm projection
200 HP Factory calibration
Stock backup file — 410 Nm · Diesel

Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #4141 · Gains DB
MATCHED ENGINE 2.8 CRD 200hp VM11D / ENS 2.8L Diesel Factory
050100150200 10002000300040005000 200 HP +0 410 Nm +0 HP Nm RPM 0100200300400
Stock Factory HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear
Required Modifications Factory · Diesel
Hardware
  • Factory hardware — no modifications required
Software / Calibration
  • OEM calibration restored (recovery / immobiliser / coding work)

Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make Jeep
Vehicle model Wrangler 2 8crd
Model year 2012
Factory power 147.1 kW (200 HP)
ECU manufacturer Bosch
Calibration stage Original (Factory)
Cylinder capacity 2776 CC
Compression ratio 16,5 : 1
Bore × Stroke 94,0 X 100,0 mm
OEM engine code VM11D / ENS
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

Engine performance matrix

Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.

Engine2.8 CRD 200hp CodeVM11D / ENS Displacement2.8L Capacity2776 CC Compression16,5 : 1 Bore × Stroke94,0 X 100,0 mm FuelDiesel Engine ID#4141
Stage Power Torque Δ HP Δ Nm
Original / Factory 200 HP 410 Nm — —
Stage 1 235 HP 520 Nm +35 (17.5%) +110
Stage 2 247 HP 541 Nm +47 (23.5%) +131
Stage 3 300 HP 636 Nm +100 (50%) +226
Stage 4 360 HP 759 Nm +160 (80%) +349
Fuel economy gain (vs. factory map, same driving profile): combined cycle −8% , full-load cruise −12%. Diesel calibrations typically net bigger combined-cycle savings thanks to shorter duty-cycle on low-load driving.

About this calibration file

This is the factory (original) ECU calibration for the 2012 Jeep Wrangler 2 8crd, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.

This file matches a Bosch ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

Two reasons. First, if your ECU write failed mid-flash and you need a verified stock image to recover from — this file restores the unit to the exact calibration it left the factory with. Second, if you plan to experiment with a tune and want a known-good rollback point that is guaranteed identical to a Jeep dealer programming.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.

This product contains a complete original ECU backup (stock file) for Jeep Wrangler 2.8CRD 2012 147.1KW with Bosch 519910. This original file corresponds to a factory engine output of approximately 147.1 kW (~200 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 519910. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprintA2EC48CD B8ED0FB2 9D590CB5 5C3AB150 B21CDF05 C90F0D9D 131F0175 CAAC3555

Related products