ORIGINAL / FACTORY Diesel 3.0 TDI 163hp

ISUZU +Vmax – D Max 3.0 TDI Turbo Diesel 119.9 kW (163 HP) Original

04080120160 10002000300040005000 163 HP +0 360 Nm +0 HP Nm RPM 0100200300400
Stock Original / Factory HP / Nm projection
163 HP Factory calibration
Stock backup file — 360 Nm · Diesel

Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #3867 · Gains DB
MATCHED ENGINE 3.0 TDI 163hp 4JJ1-TCX 3L Diesel Factory
04080120160 10002000300040005000 163 HP +0 360 Nm +0 HP Nm RPM 0100200300400
Stock Factory HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear
Required Modifications Factory · Diesel
Hardware
  • Factory hardware — no modifications required
Software / Calibration
  • OEM calibration restored (recovery / immobiliser / coding work)

Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.

File Package Delivered instantly after payment
Remove Speed Limit
Eliminate factory speed restrictions — 90, 120, 180 or 230+ km/h limiters.
Adjust or Delete
Choose to raise the limit or remove it entirely — full flexibility.
Multi-Brand
Supports VAG, BMW, Opel, Fiat, PSA, Hyundai/Kia, Saab and more.
Unlimited Files
Lifetime license — no per-file fees, no restrictions, no limits.
Compatible tools KESS V2/V3 KTAG AutoTuner CMD PCMFlash MPPS FoxFlash Flex New Genius

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make Isuzu
Vehicle model Vmax D Max
Model year 2007
Displacement 3.0 L
Fuel / Induction Turbo Diesel
Factory power 119.9 kW (163 HP)
ECU manufacturer Delphi
ECU hardware 8980797210
Calibration stage Original (Factory)
Cylinder capacity 2999 CC
Compression ratio 16,5 : 1
Bore × Stroke 95,4 X 104,9 mm
OEM engine code 4JJ1-TCX
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

Engine performance matrix

Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.

Engine3.0 TDI 163hp Code4JJ1-TCX Displacement3L Capacity2999 CC Compression16,5 : 1 Bore × Stroke95,4 X 104,9 mm FuelDiesel Engine ID#3867
Stage Power Torque Δ HP Δ Nm
Original / Factory 163 HP 360 Nm — —
Stage 1 190 HP 420 Nm +27 (16.6%) +60
Stage 2 200 HP 437 Nm +37 (22.7%) +77
Stage 3 245 HP 558 Nm +82 (50.3%) +198
Stage 4 293 HP 666 Nm +130 (79.8%) +306
Fuel economy gain (vs. factory map, same driving profile): combined cycle −8% , full-load cruise −12%. Diesel calibrations typically net bigger combined-cycle savings thanks to shorter duty-cycle on low-load driving.

About this calibration file

This is the factory (original) ECU calibration for the 2007 Isuzu Vmax D Max 3.0L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.

This file matches a Delphi ECU with hardware number 8980797210. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware 8980797210 (Delphi) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

Two reasons. First, if your ECU write failed mid-flash and you need a verified stock image to recover from — this file restores the unit to the exact calibration it left the factory with. Second, if you plan to experiment with a tune and want a known-good rollback point that is guaranteed identical to a Isuzu dealer programming.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.

This product contains a complete original ECU backup (stock file) for ISUZU +Vmax – D Max 3.0 TDI 2007 Turbodiesel 119.9KW with Delphi 8980797210. This original file corresponds to a factory engine output of approximately 119.9 kW (~163 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 8980797210. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprint80C40499 AAAB75A1 CE23C583 7EEFD1D9 2B00E0F0 08AB9EE3 274A118F 4AF42363

Related products