Stage 1
Stage 1 · Diesel · 1.6 TDCi 115hp
Ford Galaxy 2.0 TDCi Stage 1 file Delphi
Ford Galaxy 2.0 TDCi Turbo Diesel 84.6 kW (115 HP) Stage 12010, Turbo diesel, 84.6 kW (115 hp)
115 → 140 HP +25 HP +60 Nm 22% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.6 TDCi 115hp, T1WB, 1.6L, Diesel. Engine #2919 in our gains database.
- Power
- 140 HP+25 HP from 115
- Torque
- 330 Nm+60 Nm from 270
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 14C204.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Ford |
|---|---|
| Vehicle model | Galaxy |
| Model year | 2010 |
| Displacement | 2.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 84.6 kW (115 HP) |
| ECU manufacturer | Delphi |
| ECU ID | AG91-14C204-CF |
| ECU hardware | T5A14100 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1560 CC |
| Compression ratio | 16,0 : 1 |
| Bore × Stroke | 75,0 X 88,3 mm |
| OEM engine code | T1WB |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 115 HP | 270 Nm | — | — |
| Stage 1 | 140 HP | 330 Nm | +25 (21.7%) | +60 |
| Stage 2 | 147 HP | 343 Nm | +32 (27.8%) | +73 |
| Stage 3 | 173 HP | 419 Nm | +58 (50.4%) | +149 |
| Stage 4 | 207 HP | 500 Nm | +92 (80%) | +230 |
About this calibration file
The Stage 1 calibration for the 2010 Ford Galaxy 2.0L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Delphi ECU with hardware number T5A14100. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 140 HP and 330 Nm at the crank — a gain of +25 HP (22%) and +60 Nm over the factory 115 HP / 270 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
T5A14100 (Delphi) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Ford Galaxy 2.0 TDCi 2010 Turbo-Diesel 84.6KW with Delphi AG91-14C204-CF and software ID T5A14100. The base stock vehicle for this calibration has a factory output of around 84.6 kW (~115 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as AG91-14C204-CF, T5A14100. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
379CCBAB C24910C4 C4EA879A 9DE12C8C 7FA0C4F4 2362BF84 88C186A8 2708B73D