Original file
Original / Factory · Petrol · 2.5 Turbo ST 225hp
Ford Focus 2.5 Turbo original file Bosch HW 0261209048 · SW 393284
Ford Focus 2.5 Turbo Turbo Petrol 165.5 kW (225 HP) Original2008, Turbo petrol, 165.5 kW (225 hp)
225 HP Factory calibration Stock backup file, 320 Nm, Petrol
Calibrated ECU file for 0261209048 (SW 393284). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.5 Turbo ST 225hp, HYDA, 2.5L, Petrol. Engine #2861 in our gains database.
- Power
- 225 HPfactory calibration
- Torque
- 320 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261209048 and software 393284.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Ford |
|---|---|
| Vehicle model | Focus |
| Model year | 2008 |
| Displacement | 2.5 L |
| Fuel / Induction | Petrol |
| Factory power | 165.5 kW (225 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261209048 |
| ECU software | 393284 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2522 CC |
| Compression ratio | 9,0 : 1 |
| Bore × Stroke | 83,0 X 93,2 mm |
| OEM engine code | HYDA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 225 HP | 320 Nm | — | — |
| Stage 1 | 255 HP | 400 Nm | +30 (13.3%) | +80 |
| Stage 2 | 285 HP | 445 Nm | +60 (26.7%) | +125 |
| Stage 3 | 371 HP | 496 Nm | +146 (64.9%) | +176 |
| Stage 4 | 439 HP | 592 Nm | +214 (95.1%) | +272 |
About this calibration file
This is the factory (original) ECU calibration for the 2008 Ford Focus 2.5L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261209048 and software version 393284. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261209048 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Ford Focus 2.5 Turbo 2008 Turbo-Benzin 165.5KW with Bosch 0261209048 (Bosch software number 393284 ( 1037393284 )). This original file corresponds to a factory engine output of approximately 165.5 kW (~225 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261209048, 393284 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
AB6AF93F 7D7607C8 EC455384 DCDA0344 88813783 A93A37FA 65C3F90D A548638A