Ford Focus 2.5 T 20V Turbo Petrol 183.9 kW (250 HP) Original
Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
- Factory hardware — no modifications required
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Ford |
|---|---|
| Vehicle model | Focus |
| Model year | 2012 |
| Displacement | 2.5 L |
| Fuel / Induction | Petrol |
| Factory power | 183.9 kW (250 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261S09180 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1999 CC |
| Compression ratio | 9,3 : 1 |
| Bore × Stroke | 87,5 X 83,1 mm |
| OEM engine code | R9DA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 250 HP | 340 Nm | — | — |
| Stage 1 | 270 HP | 430 Nm | +20 (8%) | +90 |
| Stage 2 | 286 HP | 452 Nm | +36 (14.4%) | +112 |
| Stage 3 | 413 HP | 527 Nm | +163 (65.2%) | +187 |
| Stage 4 | 488 HP | 629 Nm | +238 (95.2%) | +289 |
About this calibration file
This is the factory (original) ECU calibration for the 2012 Ford Focus 2.5L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261S09180. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261S09180 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product Details
This product contains a complete original ECU backup (stock file) for Ford Focus 2.5 T 20V 2012 Turbo-Benzin 183.9KW with Bosch 0261S09180 (Bosch software number 530066 ( 1037530066 )). This original file corresponds to a factory engine output of approximately 183.9 kW (~250 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261S09180, 530066 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
B1D10E6D E15DEBBD F8F07966 019534D2 3177E731 02E27FAD AB61F9FA 64FC29C8Same engine — other calibrations
Alternative stages for the same ECU: Ford family
