Original file
Original / Factory · Diesel · 1.4 TDCI 70hp
Ford Fiesta 1.4 TDCi original file Bosch
Ford Fiesta 1.4 TDCi Turbo Diesel 50 kW (68 HP) Original2004, Turbo diesel, 50 kW (68 hp)
70 HP Factory calibration Stock backup file, 160 Nm, Diesel
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.4 TDCI 70hp, KVJA, 1.4L, Diesel. Engine #2798 in our gains database.
- Power
- 70 HPfactory calibration
- Torque
- 160 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 5WS40027M.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Ford |
|---|---|
| Vehicle model | Fiesta |
| Model year | 2004 |
| Displacement | 1.4 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 50 kW (68 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 5WS40027M-T |
| ECU hardware | FM06068000000 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1398 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 73,7 X 82,0 mm |
| OEM engine code | KVJA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 70 HP | 160 Nm | — | — |
| Stage 1 | 92 HP | 210 Nm | +22 (31.4%) | +50 |
| Stage 2 | 97 HP | 218 Nm | +27 (38.6%) | +58 |
| Stage 3 | 105 HP | 248 Nm | +35 (50%) | +88 |
| Stage 4 | 126 HP | 296 Nm | +56 (80%) | +136 |
About this calibration file
This is the factory (original) ECU calibration for the 2004 Ford Fiesta 1.4L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number FM06068000000. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
FM06068000000 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Ford Fiesta 1.4 TDCi 2004 Turbodiesel 50KW with Bosch 5WS40027M-T and software ID FM06068000000. This original file corresponds to a factory engine output of approximately 50 kW (~68 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 5WS40027M-T, FM06068000000. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
DB96DBE3 7313886E EAAD4701 E30AC403 94F1B9E3 E0D5E75A 6CCF47AE AF4D5331