Original file
Original / Factory · Diesel · 1.9 JTD 85hp
Fiat Punto 1.9 TDI PD original file Bosch HW 0281011494 · SW 369126
Fiat Punto 1.9 TDI PD Turbo Diesel 64.7 kW (88 HP) Original2003, Turbo diesel, 64.7 kW (88 hp)
85 HP Factory calibration Stock backup file, 196 Nm, Diesel
Calibrated ECU file for 0281011494 (SW 369126). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.9 JTD 85hp, 199B4000, 1.9L, Diesel. Engine #2625 in our gains database.
- Power
- 85 HPfactory calibration
- Torque
- 196 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281011494 and software 371885.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Fiat |
|---|---|
| Vehicle model | Punto |
| Model year | 2003 |
| Displacement | 1.9 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 64.7 kW (88 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281011494 |
| ECU software | 369126 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1910 CC |
| Compression ratio | 18,45 : 1 |
| Bore × Stroke | 82,0 X 90,4 mm |
| OEM engine code | 199B4000 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 85 HP | 196 Nm | — | — |
| Stage 1 | 115 HP | 260 Nm | +30 (35.3%) | +64 |
| Stage 2 | 121 HP | 270 Nm | +36 (42.4%) | +74 |
| Stage 3 | 128 HP | 304 Nm | +43 (50.6%) | +108 |
| Stage 4 | 153 HP | 363 Nm | +68 (80%) | +167 |
About this calibration file
This is the factory (original) ECU calibration for the 2003 Fiat Punto 1.9L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0281011494 and software version 369126. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281011494 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Fiat Punto 1.9 TDI PD 2003 Turbo-Diesel 64.7KW with Bosch 0281011494 (Bosch software number 371885 ( 1037371885 )). This original file corresponds to a factory engine output of approximately 64.7 kW (~88 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281011494, 371885 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
AAC899DC CFBA8D37 B24D7659 A092B4EA 0BBA6BB5 0C536A6F 5F317A35 FB828781