ORIGINAL / FACTORY Diesel 1.3 JTD 90hp

Fiat Grande Punto 1.3 JTD Mjet Turbo Diesel 66.2 kW (90 HP) Marelli MJD6F3HW04P 6F3PB27 3546PB80 Original

0306090 10002000300040005000 90 HP +0 200 Nm +0 HP Nm RPM 060120180
Stock Original / Factory HP / Nm projection
90 HP Factory calibration
Stock backup file — 200 Nm · Diesel

Calibrated ECU file for MJD6F3HW04P . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #2875 · Gains DB
MATCHED ENGINE 1.3 JTD 90hp 199A3000 1.2L Diesel Factory
0306090 10002000300040005000 90 HP +0 200 Nm +0 HP Nm RPM 060120180
Stock Factory HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear
Required Modifications Factory · Diesel
Hardware
  • Factory hardware — no modifications required
Software / Calibration
  • OEM calibration restored (recovery / immobiliser / coding work)

Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make Fiat
Vehicle model Grande Punto
Model year 2008
Displacement 1.3 L
Fuel / Induction Turbo Diesel
Factory power 66.2 kW (90 HP)
ECU manufacturer Marelli
ECU hardware MJD6F3HW04P
Calibration stage Original (Factory)
Cylinder capacity 1248 CC
Compression ratio 17,6 : 1
Bore × Stroke 69,6 X 82,0 mm
OEM engine code 199A3000
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

Engine performance matrix

Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.

Engine1.3 JTD 90hp Code199A3000 Displacement1.2L Capacity1248 CC Compression17,6 : 1 Bore × Stroke69,6 X 82,0 mm FuelDiesel Engine ID#2875
Stage Power Torque Δ HP Δ Nm
Original / Factory 90 HP 200 Nm — —
Stage 1 110 HP 250 Nm +20 (22.2%) +50
Stage 2 116 HP 260 Nm +26 (28.9%) +60
Stage 3 135 HP 310 Nm +45 (50%) +110
Stage 4 162 HP 370 Nm +72 (80%) +170
Fuel economy gain (vs. factory map, same driving profile): combined cycle −8% , full-load cruise −12%. Diesel calibrations typically net bigger combined-cycle savings thanks to shorter duty-cycle on low-load driving.

About this calibration file

This is the factory (original) ECU calibration for the 2008 Fiat Grande Punto 1.3L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.

This file matches a Marelli ECU with hardware number MJD6F3HW04P. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware MJD6F3HW04P (Marelli) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

Two reasons. First, if your ECU write failed mid-flash and you need a verified stock image to recover from — this file restores the unit to the exact calibration it left the factory with. Second, if you plan to experiment with a tune and want a known-good rollback point that is guaranteed identical to a Fiat dealer programming.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.

This product contains a complete original ECU backup (stock file) for Fiat Grande Punto 1.3 JTD Mjet 2008 Turbo-Diesel 66.2KW with Marelli MJD6F3HW04P and software ID 6F3PB27. This original file corresponds to a factory engine output of approximately 66.2 kW (~90 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as MJD6F3HW04P, 6F3PB27. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprint2ACEE1E0 3524DD86 C3A38607 F6B5267F DB7DA7D4 23669794 2D12683F 17FD215E

Same engine — other calibrations

Alternative stages for the same ECU: Fiat family