Stage 1
Stage 1 · Diesel · 180 Multijet 177hp
Fiat Ducato 3.0 JTD Mjet Stage 1 file Bosch HW 0281018291 · SW 519566
Fiat Ducato 3.0 JTD Mjet Turbo Diesel 130.2 kW (177 HP) Stage 12012, Turbo diesel, 130.2 kW (177 hp)
177 → 200 HP +23 HP +80 Nm 13% more power
Calibrated ECU file for 0281018291 (SW 519566). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 180 Multijet 177hp, F1CE0481E, 3L, Diesel. Engine #2564 in our gains database.
- Power
- 200 HP+23 HP from 177
- Torque
- 480 Nm+80 Nm from 400
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281018291 and software 519566.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Fiat |
|---|---|
| Vehicle model | Ducato |
| Model year | 2012 |
| Displacement | 3.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 130.2 kW (177 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281018291 |
| ECU software | 519566 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 2999 CC |
| Compression ratio | 17,5 : 1 |
| OEM engine code | F1CE0481E |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 177 HP | 400 Nm | — | — |
| Stage 1 | 200 HP | 480 Nm | +23 (13%) | +80 |
| Stage 2 | 210 HP | 499 Nm | +33 (18.6%) | +99 |
| Stage 3 | 266 HP | 620 Nm | +89 (50.3%) | +220 |
| Stage 4 | 319 HP | 740 Nm | +142 (80.2%) | +340 |
About this calibration file
The Stage 1 calibration for the 2012 Fiat Ducato 3.0L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0281018291 and software version 519566. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 200 HP and 480 Nm at the crank — a gain of +23 HP (13%) and +80 Nm over the factory 177 HP / 400 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281018291 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Fiat Ducato 3.0 JTD Mjet 2012 Turbo-Diesel 130.2KW with Bosch 0281018291 and software ID O40JTD40 (Bosch software number 519566 ( 1037519566 )). The base stock vehicle for this calibration has a factory output of around 130.2 kW (~177 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281018291, O40JTD40, 519566 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
825B47C7 55DD8FD3 A2747855 CBDC0065 42F36B68 0BA82E3E 53F5C4F4 255E4BA4