Stage 1
Stage 1 · Diesel · 1.6 HDi 8V 92hp
Citroen DS3 1.6E-HDI Stage 1 file Bosch · SW 517755
Citroen DS3 1.6E-HDI Turbo Diesel 67.7 kW (92 HP) Stage 12012, Turbo diesel, 67.7 kW (92 hp)
92 → 115 HP +23 HP +30 Nm 25% more power
Calibrated ECU file for (SW 517755). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.6 HDi 8V 92hp, DV6DTED, Bosch EDC17C10, Diesel. Engine #8808 in our gains database.
- Power
- 115 HP+23 HP from 92
- Torque
- 260 Nm+30 Nm from 230
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 517755 and software 517755.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Citroen |
|---|---|
| Vehicle model | Ds3 1 6e |
| Model year | 2012 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 67.7 kW (92 HP) |
| ECU manufacturer | Bosch |
| ECU software | 517755 |
| Calibration stage | Stage 1 |
| Cylinder capacity | Bosch EDC17C10 |
| Compression ratio | 16,0 : 1 |
| Bore × Stroke | 75,0 X 88,3 mm |
| OEM engine code | DV6DTED |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 92 HP | 230 Nm | — | — |
| Stage 1 | 115 HP | 260 Nm | +23 (25%) | +30 |
| Stage 2 | 121 HP | 270 Nm | +29 (31.5%) | +40 |
| Stage 3 | 138 HP | 357 Nm | +46 (50%) | +127 |
| Stage 4 | 166 HP | 426 Nm | +74 (80.4%) | +196 |
About this calibration file
The Stage 1 calibration for the 2012 Citroen Ds3 1 6e Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU and software version 517755. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 115 HP and 260 Nm at the crank — a gain of +23 HP (25%) and +30 Nm over the factory 92 HP / 230 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for Citroen DS3 1.6E-HDI 2012 Turbo-Diesel 67.7KW with Bosch 517755. The base stock vehicle for this calibration has a factory output of around 67.7 kW (~92 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 517755. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
5E4C3812 F9AF6639 12954C5F E7757426 FEAA04CD DCECBF62 3A4ED134 F6AEA876