Stage 2
Stage 2 · Diesel · 2.5 CRD 140hp
Chrysler Voyager 2.5 TD Stage 2 file Bosch HW 0281001768
Chrysler Voyager 2.5 TD Turbo Diesel 103 kW (140 HP) Stage 2Turbo diesel, 103 kW (140 hp)
140 → 185 HP +45 HP +109 Nm 32% more power
Calibrated ECU file for 0281001768 (SW 359275). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.5 CRD 140hp, VM20C, 2.5L, Diesel. Engine #1973 in our gains database.
- Power
- 185 HP+45 HP from 140
- Torque
- 452 Nm+109 Nm from 343
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281001768.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Chrysler |
|---|---|
| Vehicle model | Voyager |
| Displacement | 2.5 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 103 kW (140 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 359275-276 |
| ECU hardware | 0281001768 |
| Calibration stage | Stage 2 |
| OEM engine code | VM20C |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 140 HP | 343 Nm | — | — |
| Stage 1 | 176 HP | 435 Nm | +36 (25.7%) | +92 |
| Stage 2 | 185 HP | 452 Nm | +45 (32.1%) | +109 |
| Stage 3 | 210 HP | 532 Nm | +70 (50%) | +189 |
| Stage 4 | 252 HP | 635 Nm | +112 (80%) | +292 |
About this calibration file
The Stage 2 calibration for the Chrysler Voyager 2.5L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU with hardware number 0281001768. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 185 HP and 452 Nm at the crank — a gain of +45 HP (32%) and +109 Nm over the factory 140 HP / 343 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281001768 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for Chrysler Voyager 2.5 TD Turbodiesel 103KW with Bosch 0281001768. The base stock vehicle for this calibration has a factory output of around 103 kW (~140 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281001768. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
BD7EF5F5 C4EEC16C FC55A488 47B5FB86 3DF430DF 4FF29058 0EEC801D 4CA76ADD