Original file
Original / Factory · Diesel · 740D 245hp
BMW F01-F02-F03 3.0d original file Bosch HW 0281014727
BMW F01-F02-F03 3.0d Turbo Diesel 180.2 kW (245 HP) Original2012, Turbo diesel, 180.2 kW (245 hp)
245 HP Factory calibration Stock backup file, 560 Nm, Diesel
Calibrated ECU file for 0281014727. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 740D 245hp, 398D1, 3.9L, Diesel. Engine #1042 in our gains database.
- Power
- 245 HPfactory calibration
- Torque
- 560 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281014727.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | F01 F02 |
| Model year | 2012 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 180.2 kW (245 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 78SH-0000063E-062 |
| ECU hardware | 0281014727 |
| Calibration stage | Original (Factory) |
| OEM engine code | 398D1 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 245 HP | 560 Nm | — | — |
| Stage 1 | 274 HP | 630 Nm | +29 (11.8%) | +70 |
| Stage 2 | 348 HP | 823 Nm | +103 (42%) | +263 |
| Stage 3 | 368 HP | 868 Nm | +123 (50.2%) | +308 |
| Stage 4 | 441 HP | 1036 Nm | +196 (80%) | +476 |
About this calibration file
This is the factory (original) ECU calibration for the 2012 BMW F01 F02 Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0281014727. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281014727 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW F01-F02-F03 3.0d 2012 Turbo-Diesel 180.2KW with Bosch 0281014727 and software ID 78SH-0000063E-062. This original file corresponds to a factory engine output of approximately 180.2 kW (~245 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281014727, 78SH-0000063E-062. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
D282B0B7 0EF85A37 162964F2 BB5C4CEB 5C806D20 B28A9BD6 948BAEA8 8DB012B7