Stage 1
Stage 1 · Petrol · 335i - N55 Twinscroll - 306hp
BMW E90-E91- E92-E93 3.0i Stage 1 file Siemens · SW 777227
BMW E90-E91- E92-E93 3.0i Turbo Petrol 225.1 kW (306 HP) Stage 12007, Turbo petrol, 225.1 kW (306 hp)
306 → 360 HP +54 HP +120 Nm 18% more power
Calibrated ECU file for (SW 777227). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 335i - N55 Twinscroll - 306hp, N55B30A, 3L, Petrol. Engine #861 in our gains database.
- Power
- 360 HP+54 HP from 306
- Torque
- 520 Nm+120 Nm from 400
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 5WK93617 and software 777227.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E90 E91 |
| Model year | 2007 |
| Fuel / Induction | Petrol |
| Factory power | 225.1 kW (306 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | 5WK93617 |
| ECU software | 777227 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 2979 CC |
| Compression ratio | 10,2 : 1 |
| Bore × Stroke | 84,0 X 89,6 mm |
| OEM engine code | N55B30A |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 306 HP | 400 Nm | — | — |
| Stage 1 | 360 HP | 520 Nm | +54 (17.6%) | +120 |
| Stage 2 | 386 HP | 540 Nm | +80 (26.1%) | +140 |
| Stage 3 | 505 HP | 620 Nm | +199 (65%) | +220 |
| Stage 4 | 597 HP | 740 Nm | +291 (95.1%) | +340 |
About this calibration file
The Stage 1 calibration for the 2007 BMW E90 E91 Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Siemens ECU with hardware number 5WK93617 and software version 777227. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 360 HP and 520 Nm at the crank — a gain of +54 HP (18%) and +120 Nm over the factory 306 HP / 400 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
5WK93617 (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for BMW E90-E91- E92-E93 3.0i 2007 Turbo-Benzin 225.1KW with Siemens 5WK93617 (Bosch software number 777227 ( 1037777227 )). The base stock vehicle for this calibration has a factory output of around 225.1 kW (~306 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 5WK93617, 777227 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
6054135E 79C9F55F A0A6AB9B 20694C6A 631AF665 BE40E96C EA9FB303 F8267628