STAGE 3 Diesel 330D 245hp

BMW E90-E91- E92-E93 3.0d Turbo Diesel 180.2 kW (245 HP) Stage 3

090180270360 10002000300040005000 368 HP +123 806 Nm +286 HP Nm RPM 0200400600800
Stock Stage 3 HP / Nm projection
245 368 HP
+123 HP +286 Nm 50% more power

Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #955 · Gains DB TYPICAL PROJECTION
MATCHED ENGINE 330D 245hp N57D30A 3L Diesel Stage 3
090180270360 10002000300040005000 368 HP +123 806 Nm +286 HP Nm RPM 0200400600800
Stock Stage 3 HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear
Required Modifications Stage 3 · Diesel
Hardware
  • Hybrid or larger turbocharger
  • Upgraded injectors (matched flow rate)
  • Front-mount intercooler upgrade
  • Sport / decat downpipe + free-flow exhaust
  • High-flow air intake
  • Uprated clutch (manual gearbox)
Software / Calibration
  • Custom map dialled to the installed turbo, injector and intercooler spec
  • Boost, fuelling, ignition / injection timing rebuilt around the new hardware
  • All safety limits (knock, EGT, lambda, rail) re-tuned to match
  • Drivability and torque-by-gear shaped to match the hardware

Stage 3 is hardware-matched. Send your turbo / injector / intercooler / clutch spec at checkout so the file is calibrated to YOUR build — typical projection above is a guide, final dyno depends on installed hardware.

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make BMW
Vehicle model E90 E91
Model year 2009
Fuel / Induction Turbo Diesel
Factory power 180.2 kW (245 HP)
ECU manufacturer Bosch
ECU hardware 08510221
Calibration stage Stage 3
Cylinder capacity 2993 CC
Compression ratio 16,5 : 1
Bore × Stroke 84,0 X 90,0 mm
OEM engine code N57D30A
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

Engine performance matrix

Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.

Engine330D 245hp CodeN57D30A Displacement3L Capacity2993 CC Compression16,5 : 1 Bore × Stroke84,0 X 90,0 mm FuelDiesel Engine ID#955
Stage Power Torque Δ HP Δ Nm
Original / Factory 245 HP 520 Nm — —
Stage 1 300 HP 600 Nm +55 (22.4%) +80
Stage 2 315 HP 624 Nm +70 (28.6%) +104
Stage 3 368 HP 806 Nm +123 (50.2%) +286
Stage 4 441 HP 962 Nm +196 (80%) +442
Fuel economy gain (vs. factory map, same driving profile): combined cycle −8% , full-load cruise −12%. Diesel calibrations typically net bigger combined-cycle savings thanks to shorter duty-cycle on low-load driving.

About this calibration file

The Stage 3 calibration for the 2009 BMW E90 E91 Turbo Diesel targets a hardware-upgraded setup — hybrid or larger turbocharger, upgraded injectors, high-flow fuelling and in most cases a full exhaust. Maps are redrawn for the new airflow envelope with re-scaled MAF/MAP, torque limiters, smoke limiters and boost PID re-tuned.

This file matches a Bosch ECU with hardware number 08510221. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

Projected output on a healthy, stock-hardware example of this engine: 368 HP and 806 Nm at the crank — a gain of +123 HP (50%) and +286 Nm over the factory 245 HP / 520 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware 08510221 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

This stage targets a built setup — hybrid/larger turbo, upgraded injectors, high-flow fuelling, and in some cases upgraded transmission/clutch. Running the file on stock hardware is not supported and can cause detonation, EGT spikes or overboost fuel cuts.

Re-flashing the ECU leaves a flag that a franchised BMW dealer can detect with their diagnostic tool. Most markets treat this as a basis to deny powertrain warranty claims that the modification could have caused. Emissions-sensitive components (DPF, EGR, SCR) remain fully functional with this calibration — we do not remove, disable or alter any emissions hardware.

The power and torque numbers on this page are healthy-engine crank figures. On a well-maintained 2009 BMW E90 E91 running a known-good fuel brand, you should see a clearly perceptible increase in mid-range pull — typically from 1,800 to 4,000 rpm on diesel, 2,500 to 6,000 rpm on petrol — along with a shorter 80-to-120 km/h in-gear time. Thermal performance and fuel consumption depend on how you drive post-tune.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.

This product contains a calibrated Stage3 tuning file for BMW E90-E91- E92-E93 3.0d 2009 Turbo-Diesel 180.2KW with Bosch 08510221- (Bosch software number 504248 ( 1037504248 )). The base stock vehicle for this calibration has a factory output of around 180.2 kW (~245 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 08510221-, 504248 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprint2C57E99E A43A9FA2 35E95E51 AA4BC9B1 574B8AB9 0CCB2910 93B3388A C31668D9

Same engine — other calibrations

Alternative stages for the same ECU: BMW family