Original file
Original / Factory · Diesel · 320d MHEV 190hp
BMW E90-E91- E92-E93 2.0d original file Bosch · SW 504977
BMW E90-E91- E92-E93 2.0d Turbo Diesel 135.3 kW (184 HP) OriginalTurbo diesel, 135.3 kW (184 hp)
190 HP Factory calibration Stock backup file, 400 Nm, Diesel
Calibrated ECU file for 7CK5KF121A (SW 504977). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 320d MHEV 190hp, 2L, Diesel. Engine #888 in our gains database.
- Power
- 190 HPfactory calibration
- Torque
- 400 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware X and software 504977.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E90 E91 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 135.3 kW (184 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 7CK5KF121A |
| ECU software | 504977 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1995 CC |
| Compression ratio | 16,5 : 1 |
| Bore × Stroke | 84,0 X 90,0 mm |
| OEM engine code | 320d MHEV 190hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 190 HP | 400 Nm | — | — |
| Stage 1 | 220 HP | 480 Nm | +30 (15.8%) | +80 |
| Stage 2 | 231 HP | 499 Nm | +41 (21.6%) | +99 |
| Stage 3 | 285 HP | 620 Nm | +95 (50%) | +220 |
| Stage 4 | 342 HP | 740 Nm | +152 (80%) | +340 |
About this calibration file
This is the factory (original) ECU calibration for the BMW E90 E91 Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 7CK5KF121A and software version 504977. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
7CK5KF121A (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E90-E91- E92-E93 2.0d Turbo-Diesel 135.3KW with Bosch X and software ID 7CK5KF121A (Bosch software number 504977 ( 1037504977 )). This original file corresponds to a factory engine output of approximately 135.3 kW (~184 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as X, 7CK5KF121A, 504977 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
3C4717CF 364128CE 21DD957D F694259D 022EB8A4 0438BDB7 F67910F5 EBDC30E3