Stage 1
Stage 1 · Diesel · 318D 143hp
BMW E90-E91- E92-E93 2.0d Stage 1 file Bosch HW 0281015042 · SW 394078
BMW E90-E91- E92-E93 2.0d Turbo Diesel 105.2 kW (143 HP) Stage 12008, Turbo diesel, 105.2 kW (143 hp)
143 → 180 HP +37 HP +90 Nm 26% more power
Calibrated ECU file for 0281015042 (SW 394078). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 318D 143hp, N47D20C, Diesel. Engine #9454 in our gains database.
- Power
- 180 HP+37 HP from 143
- Torque
- 390 Nm+90 Nm from 300
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281015042 and software 394078.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E90 E91 |
| Model year | 2008 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 105.2 kW (143 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281015042 |
| ECU software | 394078 |
| Calibration stage | Stage 1 |
| OEM engine code | N47D20C |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 143 HP | 300 Nm | — | — |
| Stage 1 | 180 HP | 390 Nm | +37 (25.9%) | +90 |
| Stage 2 | 203 HP | 441 Nm | +60 (42%) | +141 |
| Stage 3 | 215 HP | 465 Nm | +72 (50.3%) | +165 |
| Stage 4 | 257 HP | 555 Nm | +114 (79.7%) | +255 |
About this calibration file
The Stage 1 calibration for the 2008 BMW E90 E91 Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0281015042 and software version 394078. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 180 HP and 390 Nm at the crank — a gain of +37 HP (26%) and +90 Nm over the factory 143 HP / 300 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281015042 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for BMW E90-E91- E92-E93 2.0d 2008 Turbo-Diesel 105.2KW with Bosch 0281015042 (Bosch software number 394078 ( 1037394078 )). The base stock vehicle for this calibration has a factory output of around 105.2 kW (~143 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281015042, 394078 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E1D94CA4 DEB63F5E 8F5E8112 AC957DCD 8A96B818 80AE6BA0 E5C5822A 20847C08