Stage 1
Stage 1 · Diesel · 325D 177hp
BMW E90-E91 320D Stage 1 file Bosch · SW 391387
BMW E90-E91 320D Turbo Diesel 130.2 kW (177 HP) Stage 12008, Turbo diesel, 130.2 kW (177 hp)
177 → 214 HP +37 HP +52 Nm 21% more power
Calibrated ECU file for 71MDKC221A (SW 391387). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 325D 177hp, 306D3, 3L, Diesel. Engine #853 in our gains database.
- Power
- 214 HP+37 HP from 177
- Torque
- 452 Nm+52 Nm from 400
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 07810000 and software 391387.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E90 E91 320d |
| Model year | 2008 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 130.2 kW (177 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 07810000 |
| ECU software | 391387 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 2993 CC |
| Compression ratio | 17,0 : 1 |
| Bore × Stroke | 84,0 X 90,0 mm |
| OEM engine code | 306D3 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 177 HP | 400 Nm | — | — |
| Stage 1 | 214 HP | 452 Nm | +37 (20.9%) | +52 |
| Stage 2 | 265 HP | 550 Nm | +88 (49.7%) | +150 |
| Stage 3 | 278 HP | 620 Nm | +101 (57.1%) | +220 |
| Stage 4 | 319 HP | 740 Nm | +142 (80.2%) | +340 |
About this calibration file
The Stage 1 calibration for the 2008 BMW E90 E91 320d Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 07810000 and software version 391387. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 214 HP and 452 Nm at the crank — a gain of +37 HP (21%) and +52 Nm over the factory 177 HP / 400 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
07810000 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for BMW E90-E91 320D 2008 Turbo-Diesel 130.2KW with Bosch 07810000 and software ID 71MDKC221A (Bosch software number 391387 ( 1037391387 )). The base stock vehicle for this calibration has a factory output of around 130.2 kW (~177 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 07810000, 71MDKC221A, 391387 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
ACAB2F86 897D9537 A19F1E28 8F833858 E2781764 772516EA F48703D7 49A3A28B