Original file
Original / Factory · Diesel · 318D 122hp
BMW E90-E91 318D original file Bosch · SW 389883
BMW E90-E91 318D Turbo Diesel 86.8 kW (118 HP) Original2007, Turbo diesel, 86.8 kW (118 hp)
122 HP Factory calibration Stock backup file, 280 Nm, Diesel
Calibrated ECU file for (SW 389883). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 318D 122hp, M47TU2D20, 2L, Diesel. Engine #846 in our gains database.
- Power
- 122 HPfactory calibration
- Torque
- 280 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware O and software 389883.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E90 E91 318d |
| Model year | 2007 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 86.8 kW (118 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | S14947 |
| ECU software | 389883 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1995 CC |
| Compression ratio | 17,0 : 1 |
| Bore × Stroke | 84,0 X 90,0 mm |
| OEM engine code | M47TU2D20 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 122 HP | 280 Nm | — | — |
| Stage 1 | 155 HP | 340 Nm | +33 (27%) | +60 |
| Stage 2 | 160 HP | 350 Nm | +38 (31.1%) | +70 |
| Stage 3 | 183 HP | 434 Nm | +61 (50%) | +154 |
| Stage 4 | 220 HP | 518 Nm | +98 (80.3%) | +238 |
About this calibration file
This is the factory (original) ECU calibration for the 2007 BMW E90 E91 318d Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number S14947 and software version 389883. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
S14947 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E90-E91 318D 2007 Turbodiesel 86.8KW with Bosch O and software ID S14947 (Bosch software number 389883 ( 1037389883 )). This original file corresponds to a factory engine output of approximately 86.8 kW (~118 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as O, S14947, 389883 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
371C9536 3AD67E05 434E6D66 4BADE747 BD8D4B35 9636F146 F0240ECB 903512F5