Stage 2
Stage 2 · Diesel · 118D 143hp
BMW E88 2.0 D Stage 2 file Bosch HW 0281011631 · SW 371269
BMW E88 2.0 D Turbo Diesel 103 kW (140 HP) Stage 22002, Turbo diesel, 103 kW (140 hp)
143 → 190 HP +47 HP +115 Nm 33% more power
Calibrated ECU file for 0281011631 (SW 371269). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 118D 143hp, N47D20, 2L, Diesel. Engine #771 in our gains database.
- Power
- 190 HP+47 HP from 143
- Torque
- 415 Nm+115 Nm from 300
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281011631 and software 371269.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E88 |
| Model year | 2002 |
| Displacement | 2.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 103 kW (140 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281011631 |
| ECU software | 371269 |
| Calibration stage | Stage 2 |
| Cylinder capacity | 1995 CC |
| Compression ratio | 16,0 : 1 |
| Bore × Stroke | 84,0 X 90,0 mm |
| OEM engine code | N47D20 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 143 HP | 300 Nm | — | — |
| Stage 1 | 180 HP | 390 Nm | +37 (25.9%) | +90 |
| Stage 2 | 190 HP | 415 Nm | +47 (32.9%) | +115 |
| Stage 3 | 215 HP | 465 Nm | +72 (50.3%) | +165 |
| Stage 4 | 257 HP | 555 Nm | +114 (79.7%) | +255 |
About this calibration file
The Stage 2 calibration for the 2002 BMW E88 2.0L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU with hardware number 0281011631 and software version 371269. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 190 HP and 415 Nm at the crank — a gain of +47 HP (33%) and +115 Nm over the factory 143 HP / 300 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281011631 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for BMW E88 2.0 D 2002 Turbodiesel 103KW with Bosch 0281011631 and software ID 59M534 (Bosch software number 371269 ( 1037371269 )). The base stock vehicle for this calibration has a factory output of around 103 kW (~140 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281011631, 59M534, 371269 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
D4A1A130 0C32BB99 FD050AFE D60E55CE 3D9F299F 2B375130 4F2B1CFF 935CDBA7