Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
BMW X1 E84
  1. Home
  2. I need a file
  3. ECU files
  4. BMW
  5. BMW E84

Instant download

BMW E84 2.0d original file Bosch EDC17 · SW 504298

2010 · Turbo diesel · 177 hp (130 kW)

Share WhatsApp Facebook

BMW X1 E84 2009–2015

Dyno sheet

Power
177 hp
Torque
350 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.00751501503002254503006001000200030004000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy s/xDrive 20d. Results depend on the car's condition, fuel and parts.

Power
177 hp 130 kW
ECU
Bosch EDC17
Engine
s/xDrive 20d Turbo diesel · 1,995 cc · 4 cyl
File
2 MB BIN, ready to write

Bosch EDC17 on the BMW E84 2.0d

Software and hardware

Software
504298 (1037504298) The software inside: your read must show this number

Check your read against this file

How the Bosch EDC17 is read: OBD, Bench and Boot

  • OBD
  • Bench
  • Boot
  • KESS3
  • K-TAG
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius
  • New Trasdata
  • bFlash
  • PCMflash
  • Byteshooter
  • Bitbox
  • DFOX
  • Cummins Diagnostics
  • Caterpillar/Perkins Diagnostics

Older tools

  • KESS V2
  • Trasdata
  • MAGPro2

Built on request for the BMW E84 2.0d

  • DPF off
  • EGR off
  • DTC off
  • Speed limiter (Vmax) off
  • Swirl flaps off
  • Start/stop off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numberssoftware 504298
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows software 504298 (1037504298), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2010 BMW E84 2.0d (130 kW, 177 hp), for its Bosch EDC17 ECU with software 504298 (1037504298). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: injection quantity and timing, boost and rail pressure, the torque and smoke limiters, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The BMW E84 2.0d carries the s/xDrive 20d engine, 177 hp and 350 Nm from the factory. On this engine, Stage 1 usually gives about 211 hp and 400 Nm (+34 hp, +50 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 504298 of the BMW E84 2.0d we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

The Bosch EDC17 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius, Dimsport New Trasdata and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

DPF off, EGR off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Software 504298 (1037504298) is the calibration inside the Bosch ECU.

Questions

Which ECU does this BMW E84 2.0d original file fit?

A Bosch EDC17 ECU with software 504298 (1037504298). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch EDC17 read and written?

Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the BMW E84 2.0d?

Usually about 211 hp and 400 Nm against 177 hp and 350 Nm stock (+34 hp, +50 Nm). Typical for a healthy engine, never a promise for one car.

Can you add DPF off and EGR off to the Bosch EDC17 file?

Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

Does software 504298 fit other cars?

We also sell this software for the BMW E90-E91- E92-E93 2.0d and BMW E81-E87 2.0d. The hardware number on your ECU decides whether the same file fits: match it before you write.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read