Original file
Original / Factory · Petrol · 730i 218hp
BMW E65 X3 3.0i original file Siemens
BMW E65 X3 3.0i Petrol 160.3 kW (218 HP) Original2002, Petrol, 160.3 kW (218 hp)
218 HP Factory calibration Stock backup file, 290 Nm, Petrol
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 730i 218hp, 308S1, 3L, Petrol. Engine #1040 in our gains database.
- Power
- 218 HPfactory calibration
- Torque
- 290 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 5WK93014.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E65 X3 |
| Model year | 2002 |
| Fuel / Induction | Petrol |
| Factory power | 160.3 kW (218 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | 5WK93014 |
| ECU software | 5WK9301 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2997 CC |
| Compression ratio | 10,5 : 1 |
| Bore × Stroke | 84,0 X 67,6 mm |
| OEM engine code | 308S1 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 218 HP | 290 Nm | — | — |
| Stage 1 | 241 HP | 323 Nm | +23 (10.6%) | +33 |
| Stage 2 | 255 HP | 339 Nm | +37 (17%) | +49 |
| Stage 3 | 360 HP | 450 Nm | +142 (65.1%) | +160 |
| Stage 4 | 425 HP | 537 Nm | +207 (95%) | +247 |
About this calibration file
This is the factory (original) ECU calibration for the 2002 BMW E65 X3 Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Siemens ECU with hardware number 5WK93014 and software version 5WK9301. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
5WK93014 (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E65 X3 3.0i 2002 Benzin 160.3KW with Siemens 5WK93014 and software ID 5WK9301. This original file corresponds to a factory engine output of approximately 160.3 kW (~218 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 5WK93014, 5WK9301. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
24522BC0 60F1970A C3030C51 5FC85742 30C7881F E1C30559 5084AC58 9DDA485F