Original file
Original / Factory · Diesel · 740d 320hp
BMW E65 740D original file Bosch · SW 377759
BMW E65 740D Turbo Diesel 239.8 kW (326 HP) Original2010, Turbo diesel, 239.8 kW (326 hp)
320 HP Factory calibration Stock backup file, 680 Nm, Diesel
Calibrated ECU file for (SW 377759). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 740d 320hp, B57D30, 3L, Diesel. Engine #1062 in our gains database.
- Power
- 320 HPfactory calibration
- Torque
- 680 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware O and software 377759.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E65 740d |
| Model year | 2010 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 239.8 kW (326 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 28Z9G2 |
| ECU software | 377759 |
| Calibration stage | Original (Factory) |
| OEM engine code | B57D30 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 320 HP | 680 Nm | — | — |
| Stage 1 | 400 HP | 800 Nm | +80 (25%) | +120 |
| Stage 2 | 454 HP | 1000 Nm | +134 (41.9%) | +320 |
| Stage 3 | 480 HP | 1054 Nm | +160 (50%) | +374 |
| Stage 4 | 576 HP | 1258 Nm | +256 (80%) | +578 |
About this calibration file
This is the factory (original) ECU calibration for the 2010 BMW E65 740d Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 28Z9G2 and software version 377759. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
28Z9G2 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E65 740D 2010 Turbo-Diesel 239.8KW with Bosch O and software ID 28Z9G2 (Bosch software number 377759 ( 1037377759 )). This original file corresponds to a factory engine output of approximately 239.8 kW (~326 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as O, 28Z9G2, 377759 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
441C9C7D 90245232 8D78BEDC 98ACBD76 A0D16B63 02DDD46A 229B4252 DD4FE182