Original file
Original / Factory · Petrol · M6 5.0 V10 - 507hp
BMW E63 M6 5.0i V10 original file Bosch
BMW E63 M6 5.0i V10 Petrol 372.9 kW (507 HP) Original2008, Petrol, 372.9 kW (507 hp)
507 HP Factory calibration Stock backup file, 537 Nm, Petrol
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: M6 5.0 V10 - 507hp, S85B50A, 5L, Petrol. Engine #1026 in our gains database.
- Power
- 507 HPfactory calibration
- Torque
- 537 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 07842121.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E63 M6 |
| Model year | 2008 |
| Fuel / Induction | Petrol |
| Factory power | 372.9 kW (507 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 07842121 |
| ECU software | 07842103 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 4999 CC |
| Compression ratio | 12,0 : 1 |
| Bore × Stroke | 92,0 X 75,2 mm |
| OEM engine code | S85B50A |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 507 HP | 537 Nm | — | — |
| Stage 1 | 530 HP | 560 Nm | +23 (4.5%) | +23 |
| Stage 2 | 562 HP | 588 Nm | +55 (10.8%) | +51 |
| Stage 3 | 837 HP | 832 Nm | +330 (65.1%) | +295 |
| Stage 4 | 989 HP | 993 Nm | +482 (95.1%) | +456 |
About this calibration file
This is the factory (original) ECU calibration for the 2008 BMW E63 M6 Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 07842121 and software version 07842103. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
07842121 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E63 M6 5.0i V10 2008 Benzin 372.9KW with Bosch 07842121. This original file corresponds to a factory engine output of approximately 372.9 kW (~507 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 07842121. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
3F9B2292 3905D9CF 3C392ECC 2B1C6DE6 60557504 0EC49770 38A374D3 0A257864