Original file
Original / Factory · Diesel · 535D 272hp
BMW E60-E61 535D original file Bosch HW 0281012191 · SW 629965
BMW E60-E61 535D Turbo Diesel 200.1 kW (272 HP) Original2007, Turbo diesel, 200.1 kW (272 hp)
272 HP Factory calibration Stock backup file, 560 Nm, Diesel
Calibrated ECU file for 0281012191 (SW 629965). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 535D 272hp, 306D4, 3L, Diesel. Engine #975 in our gains database.
- Power
- 272 HPfactory calibration
- Torque
- 560 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281012191 and software 390198.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E60 E61 535d |
| Model year | 2007 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 200.1 kW (272 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281012191 |
| ECU software | 629965 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2993 CC |
| Compression ratio | 17,0 : 1 |
| Bore × Stroke | 84,0 X 90,0 mm |
| OEM engine code | 306D4 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 272 HP | 560 Nm | — | — |
| Stage 1 | 320 HP | 660 Nm | +48 (17.6%) | +100 |
| Stage 2 | 330 HP | 680 Nm | +58 (21.3%) | +120 |
| Stage 3 | 408 HP | 868 Nm | +136 (50%) | +308 |
| Stage 4 | 490 HP | 1036 Nm | +218 (80.1%) | +476 |
About this calibration file
This is the factory (original) ECU calibration for the 2007 BMW E60 E61 535d Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0281012191 and software version 629965. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281012191 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E60-E61 535D 2007 Turbodiesel 200.1KW with Bosch 0281012191 (Bosch software number 390198 ( 1037390198 )). This original file corresponds to a factory engine output of approximately 200.1 kW (~272 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281012191, 390198 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
B8FC851D 1D69E81B 55568BAC 94D8DEA8 479245A1 62A860A7 B0E3AA6C 8F419DF2