Stage 1
Stage 1 · Petrol · 530i 272hp
BMW E60-E61 530i Stage 1 file
BMW E60-E61 530i Petrol 200.1 kW (272 HP) Stage 12010, Petrol, 200.1 kW (272 hp)
272 → 290 HP +18 HP +20 Nm 7% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 530i 272hp, N52B30A, 3L, Petrol. Engine #987 in our gains database.
- Power
- 290 HP+18 HP from 272
- Torque
- 340 Nm+20 Nm from 320
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
The numbers in your read must be the ones listed on this page.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E60 E61 530i |
| Model year | 2010 |
| Fuel / Induction | Petrol |
| Factory power | 200.1 kW (272 HP) |
| Calibration stage | Stage 1 |
| Cylinder capacity | 2996 CC |
| Compression ratio | 12,0 : 1 |
| Bore × Stroke | 85,0 X 88,0 mm |
| OEM engine code | N52B30A |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 272 HP | 320 Nm | — | — |
| Stage 1 | 290 HP | 340 Nm | +18 (6.6%) | +20 |
| Stage 2 | 307 HP | 357 Nm | +35 (12.9%) | +37 |
| Stage 3 | 449 HP | 496 Nm | +177 (65.1%) | +176 |
| Stage 4 | 530 HP | 592 Nm | +258 (94.9%) | +272 |
About this calibration file
The Stage 1 calibration for the 2010 BMW E60 E61 530i Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a OEM ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 290 HP and 340 Nm at the crank — a gain of +18 HP (7%) and +20 Nm over the factory 272 HP / 320 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for BMW E60-E61 530i 2010 Benzin 200.1KW . The base stock vehicle for this calibration has a factory output of around 200.1 kW (~272 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number the ECU part number in the product title.Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
AE70C1A1 FE629817 97658D08 3D28A358 0A6573A8 BEB400FA 8C959934 BB30D839