Stage 2
Stage 2 · Diesel · 525D 218hp (1995cc)
BMW E60-E61 530D Stage 2 file Bosch HW 0281011120 · SW 361890
BMW E60-E61 530D Turbo Diesel 164.8 kW (224 HP) Stage 22002, Turbo diesel, 164.8 kW (224 hp)
218 → 284 HP +66 HP +70 Nm 30% more power
Calibrated ECU file for 0281011120 (SW 361890). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 525D 218hp (1995cc), N47D20D, 2L, Diesel. Engine #984 in our gains database.
- Power
- 284 HP+66 HP from 218
- Torque
- 520 Nm+70 Nm from 450
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281011120 and software 361890.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E60 E61 530d |
| Model year | 2002 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 164.8 kW (224 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281011120 |
| ECU software | 361890 |
| Calibration stage | Stage 2 |
| OEM engine code | N47D20D |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 218 HP | 450 Nm | — | — |
| Stage 1 | 270 HP | 500 Nm | +52 (23.9%) | +50 |
| Stage 2 | 284 HP | 520 Nm | +66 (30.3%) | +70 |
| Stage 3 | 327 HP | 698 Nm | +109 (50%) | +248 |
| Stage 4 | 392 HP | 833 Nm | +174 (79.8%) | +383 |
About this calibration file
The Stage 2 calibration for the 2002 BMW E60 E61 530d Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU with hardware number 0281011120 and software version 361890. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 284 HP and 520 Nm at the crank — a gain of +66 HP (30%) and +70 Nm over the factory 218 HP / 450 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281011120 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for BMW E60-E61 530D 2002 Turbodiesel 164.8KW with Bosch 0281011120 and software ID A2TTA7 (Bosch software number 361890 ( 1037361890 )). The base stock vehicle for this calibration has a factory output of around 164.8 kW (~224 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281011120, A2TTA7, 361890 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
3A5B6115 7575BA8E EE3AC61B 6523853F CBE7F108 78536FC1 F95E7CC1 2720E2B1