Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
BMW 5-series E60 E61
  1. Home
  2. I need a file
  3. ECU files
  4. BMW
  5. BMW E60

Instant download

BMW E60 520i original file Siemens/Continental HW 5WK93016 · 5WK9301

2004 · Petrol · 170 hp (125 kW)

Share WhatsApp Facebook

BMW 5-series E60 E61 2004–2010

Dyno sheet

Power
170 hp
Torque
210 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.0075751501502252253003001000200030004000500060007000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 520i. Results depend on the car's condition, fuel and parts.

Power
170 hp 125 kW
ECU
Siemens/Continental
Engine
520i Petrol · 2,171 cc · 6 cyl
File
1 MB BIN, ready to write

Siemens/Continental on the BMW E60 520i

Software and hardware

Hardware
5WK93016 Siemens/Continental's number for the ECU itself, on its label
Software ID
5WK9301 The software's own ID, in the file

Check your read against this file

How the Siemens/Continental is read: OBD and Bench

  • OBD
  • Bench
  • Autotuner
  • FLEX
  • CMD Flash

Older tools

  • KESS V2

Built on request for the BMW E60 520i

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off
  • Pops and bangs

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 5WK93016 and software ID 5WK9301
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 5WK93016 and software ID 5WK9301, the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2004 BMW E60 520i (125 kW, 170 hp), for its Siemens/Continental ECU with hardware 5WK93016 and software ID 5WK9301. Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: ignition, fuelling and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The BMW E60 520i carries the 520i engine, 170 hp and 210 Nm from the factory. On this engine, Stage 1 usually gives about 180 hp and 230 Nm (+10 hp, +20 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For this calibration of the BMW E60 520i we sell the original and Stage 1. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.

The Siemens/Continental ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

Catalyst off, DTC off, speed limiter (Vmax) off and pops and bangs can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 5WK93016 is the number on the Siemens/Continental ECU's label. Software ID 5WK9301 names that calibration in your tool's read.

Questions

Which ECU does this BMW E60 520i original file fit?

A Siemens/Continental ECU with hardware 5WK93016 and software ID 5WK9301. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Siemens/Continental ECU read and written?

Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the BMW E60 520i?

Usually about 180 hp and 230 Nm against 170 hp and 210 Nm stock (+10 hp, +20 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the Siemens/Continental ECU file?

Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 1 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read