Original file
Original / Factory · Petrol · 320i 170hp
BMW E46 320ci original file Siemens · SW 430037
BMW E46 320ci Petrol 125 kW (170 HP) Original2001, Petrol, 125 kW (170 hp)
170 HP Factory calibration Stock backup file, 210 Nm, Petrol
Calibrated ECU file for (SW 430037). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 320i 170hp, M54B22, 2L, Petrol. Engine #838 in our gains database.
- Power
- 170 HPfactory calibration
- Torque
- 210 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 5WK9001 and software 430037.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E46 320ci |
| Model year | 2001 |
| Fuel / Induction | Petrol |
| Factory power | 125 kW (170 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | 5WK9001 |
| ECU software | 430037 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1991 CC |
| Compression ratio | 11,0 : 1 |
| Bore × Stroke | 80,0 X 66,0 mm |
| OEM engine code | M54B22 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 170 HP | 210 Nm | — | — |
| Stage 1 | 185 HP | 230 Nm | +15 (8.8%) | +20 |
| Stage 2 | 196 HP | 242 Nm | +26 (15.3%) | +32 |
| Stage 3 | 281 HP | 326 Nm | +111 (65.3%) | +116 |
| Stage 4 | 332 HP | 389 Nm | +162 (95.3%) | +179 |
About this calibration file
This is the factory (original) ECU calibration for the 2001 BMW E46 320ci Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Siemens ECU with hardware number 5WK9001 and software version 430037. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
5WK9001 (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E46 320ci 2001 Benzin 125KW with Siemens 5WK9001 (Bosch software number 430037 ( 1037430037 )). This original file corresponds to a factory engine output of approximately 125 kW (~170 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 5WK9001, 430037 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
7BBC656A C42F12AF 8418F0F3 16998111 C82E2B55 963A2333 9BBE6F7B F25AC37D