Stage 1
Stage 1 · Petrol · 1.8 TFSI 180hp
Audi TT 1.8 T Stage 1 file Bosch HW 0261207027 · 8N0906018AB · SW 354503
Audi TT 1.8 T Turbo Petrol 132.4 kW (180 HP) Stage 1Turbo petrol, 132.4 kW (180 hp)
180 → 240 HP +60 HP +130 Nm 33% more power
Calibrated ECU file for 0261207027 (SW 354503). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.8 TFSI 180hp, CJSA, 1.8L, Petrol. Engine #728 in our gains database.
- Power
- 240 HP+60 HP from 180
- Torque
- 380 Nm+130 Nm from 250
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261207027 and software 354503.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | Tt |
| Displacement | 1.8 L |
| Fuel / Induction | Petrol |
| Factory power | 132.4 kW (180 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 8N0906018AB |
| ECU hardware | 0261207027 |
| ECU software | 354503 |
| Calibration stage | Stage 1 |
| OEM engine code | CJSA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 180 HP | 250 Nm | — | — |
| Stage 1 | 240 HP | 380 Nm | +60 (33.3%) | +130 |
| Stage 2 | 254 HP | 399 Nm | +74 (41.1%) | +149 |
| Stage 3 | 297 HP | 419 Nm | +117 (65%) | +169 |
| Stage 4 | 351 HP | 463 Nm | +171 (95%) | +213 |
About this calibration file
The Stage 1 calibration for the Audi Tt 1.8L Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0261207027 and software version 354503. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 240 HP and 380 Nm at the crank — a gain of +60 HP (33%) and +130 Nm over the factory 180 HP / 250 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261207027 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Audi TT 1.8 T Turbo-Benzin 132.4KW with Bosch 0261207027 and software ID 8N0906018AB (Bosch software number 354503 ( 1037354503 )). The base stock vehicle for this calibration has a factory output of around 132.4 kW (~180 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261207027, 8N0906018AB, 354503 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
A42C7F07 6E1C8C17 C79DCF39 5D7BEE73 21A8EEAD 7D9D2010 4104C804 43790213