Original file
Original / Factory · Petrol · 2.0 TFSI 265hp
Audi S3 2.0 TFSI original file Bosch HW 0261S02342 · 8P0907115H · SW 384214
Audi S3 2.0 TFSI Turbo Petrol 194.9 kW (265 HP) Original2005, Turbo petrol, 194.9 kW (265 hp)
265 HP Factory calibration Stock backup file, 350 Nm, Petrol
Calibrated ECU file for 0261S02342 (SW 384214). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 TFSI 265hp, BZC, 2L, Petrol. Engine #676 in our gains database.
- Power
- 265 HPfactory calibration
- Torque
- 350 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261S02342 and software 384214.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | S3 |
| Model year | 2005 |
| Displacement | 2.0 L |
| Fuel / Induction | TFSI (Turbo Petrol) |
| Factory power | 194.9 kW (265 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 8P0907115H |
| ECU hardware | 0261S02342 |
| ECU software | 384214 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1984 CC |
| Compression ratio | 9,8 : 1 |
| Bore × Stroke | 82,5 X 92,8 mm |
| OEM engine code | BZC |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 265 HP | 350 Nm | — | — |
| Stage 1 | 310 HP | 410 Nm | +45 (17%) | +60 |
| Stage 2 | 371 HP | 508 Nm | +106 (40%) | +158 |
| Stage 3 | 437 HP | 543 Nm | +172 (64.9%) | +193 |
| Stage 4 | 517 HP | 648 Nm | +252 (95.1%) | +298 |
About this calibration file
This is the factory (original) ECU calibration for the 2005 Audi S3 2.0L TFSI (Turbo Petrol), extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261S02342 and software version 384214. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261S02342 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Audi S3 2.0 TFSI 2005 Turbo-Benzin 194.9KW with Bosch 0261S02342 and software ID 8P0907115H (Bosch software number 384214 ( 1037384214 )). This original file corresponds to a factory engine output of approximately 194.9 kW (~265 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261S02342, 8P0907115H, 384214 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
A2550C0D F7CEAE8E C3E8552F A5105E0A 351005FC B945DC80 74639532 E648D294