Original file
Original / Factory · Petrol · 1.8T 20V 225hp
Audi S3 1.8 T original file Bosch HW 0261207751 · 8N0906018BH · SW 362999
Audi S3 1.8 T Turbo Petrol 165.5 kW (225 HP) Original2002, Turbo petrol, 165.5 kW (225 hp)
225 HP Factory calibration Stock backup file, 280 Nm, Petrol
Calibrated ECU file for 0261207751 (SW 362999). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.8T 20V 225hp, BAM, 1.8L, Petrol. Engine #675 in our gains database.
- Power
- 225 HPfactory calibration
- Torque
- 280 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261207751 and software 362999.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | S3 |
| Model year | 2002 |
| Displacement | 1.8 L |
| Fuel / Induction | Petrol |
| Factory power | 165.5 kW (225 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 8N0906018BH |
| ECU hardware | 0261207751 |
| ECU software | 362999 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1781 CC |
| Compression ratio | 9,5 : 1 |
| Bore × Stroke | 81,0 X 86,4 mm |
| OEM engine code | BAM |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 225 HP | 280 Nm | — | — |
| Stage 1 | 260 HP | 360 Nm | +35 (15.6%) | +80 |
| Stage 2 | 265 HP | 410 Nm | +40 (17.8%) | +130 |
| Stage 3 | 371 HP | 434 Nm | +146 (64.9%) | +154 |
| Stage 4 | 439 HP | 518 Nm | +214 (95.1%) | +238 |
About this calibration file
This is the factory (original) ECU calibration for the 2002 Audi S3 1.8L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261207751 and software version 362999. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261207751 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Audi S3 1.8 T 2002 Turbo-Benzin 165.5KW with Bosch 0261207751 and software ID 8N0906018BH (Bosch software number 362999 ( 1037362999 )). This original file corresponds to a factory engine output of approximately 165.5 kW (~225 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261207751, 8N0906018BH, 362999 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
49ECB216 585A2BC1 289F6B45 8DB8BC39 451B7C4D BCD8F9D4 1E99500E B2FDF7F0