Original file
Original / Factory · Petrol · 4.2 FSI 450hp
Audi RS4 4.2 V8 original file Bosch · 8T2907560 · SW 531220
Audi RS4 4.2 V8 Petrol 331 kW (450 HP) Original2013, Petrol, 331 kW (450 hp)
450 HP Factory calibration Stock backup file, 430 Nm, Petrol
Calibrated ECU file for (SW 531220). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 4.2 FSI 450hp, CFSA, 4.2L, Petrol. Engine #656 in our gains database.
- Power
- 450 HPfactory calibration
- Torque
- 430 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 8T2907560 and software 531220.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | Rs4 |
| Model year | 2013 |
| Displacement | 4.2 L |
| Fuel / Induction | Petrol |
| Factory power | 331 kW (450 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 8T2907560 |
| ECU software | 531220 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 4163 CC |
| Compression ratio | 11,0 : 1 |
| Bore × Stroke | 84,5 X 92,8 mm |
| OEM engine code | CFSA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 450 HP | 430 Nm | — | — |
| Stage 1 | 475 HP | 460 Nm | +25 (5.6%) | +30 |
| Stage 2 | 504 HP | 483 Nm | +54 (12%) | +53 |
| Stage 3 | 743 HP | 667 Nm | +293 (65.1%) | +237 |
| Stage 4 | 878 HP | 796 Nm | +428 (95.1%) | +366 |
About this calibration file
This is the factory (original) ECU calibration for the 2013 Audi Rs4 4.2L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 8T2907560 and software version 531220. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
8T2907560 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Audi RS4 4.2 V8 2013 Benzin 331KW with Bosch 8T2907560 (Bosch software number 531220 ( 1037531220 )). This original file corresponds to a factory engine output of approximately 331 kW (~450 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 8T2907560, 531220 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
DA4040C1 667E718E A8393721 0C33F25B 507F0541 0974B542 ADBE8BCB 4FF47FCE