Stage 2
Stage 2 · Diesel · 3.0 TDI 204hp
Audi Q7 3.0 TDI CR Stage 2 file Bosch · 4L0907401C · SW 518045
Audi Q7 3.0 TDI CR Turbo Petrol 150 kW (204 HP) Stage 22012, Turbo petrol, 150 kW (204 hp)
204 → 310 HP +106 HP +174 Nm 52% more power
Calibrated ECU file for 4L0907401C (SW 518045). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 3.0 TDI 204hp, CJGC, 3L, Diesel. Engine #616 in our gains database.
- Power
- 310 HP+106 HP from 204
- Torque
- 624 Nm+174 Nm from 450
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 4L0907401C and software 518045.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | Q7 |
| Model year | 2012 |
| Displacement | 3.0 L |
| Fuel / Induction | TDI (Turbo Diesel) |
| Factory power | 150 kW (204 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 4L0907401C |
| ECU software | 518045 |
| Calibration stage | Stage 2 |
| Cylinder capacity | 2967 CC |
| Compression ratio | 16,8 : 1 |
| Bore × Stroke | 83,0 X 91,4 mm |
| OEM engine code | CJGC |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 204 HP | 450 Nm | — | — |
| Stage 1 | 295 HP | 600 Nm | +91 (44.6%) | +150 |
| Stage 2 | 310 HP | 624 Nm | +106 (52%) | +174 |
| Stage 3 | 326 HP | 698 Nm | +122 (59.8%) | +248 |
| Stage 4 | 367 HP | 833 Nm | +163 (79.9%) | +383 |
About this calibration file
The Stage 2 calibration for the 2012 Audi Q7 3.0L TDI (Turbo Diesel) is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU and software version 518045. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 310 HP and 624 Nm at the crank — a gain of +106 HP (52%) and +174 Nm over the factory 204 HP / 450 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage2 tuning file for Audi Q7 3.0 TDI CR 2012 Turbo-Benzin 150KW with Bosch 4L0907401C (Bosch software number 518045 ( 1037518045 )). The base stock vehicle for this calibration has a factory output of around 150 kW (~204 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 4L0907401C, 518045 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
774FEE3A AC76DE57 3FD3E29D 8C1269E7 5EA39788 B4FE73CB 1830E041 5F0E2F0F