Stage 1
Stage 1 · Diesel · 3.0 TDI 240hp
Audi Q7 3.0 TDI CR Stage 1 file Bosch · 4L0907401A · SW 518178
Audi Q7 3.0 TDI CR Turbo Diesel 175.8 kW (239 HP) Stage 12008, Turbo diesel, 175.8 kW (239 hp)
240 → 295 HP +55 HP +75 Nm 23% more power
Calibrated ECU file for 4L0907401A (SW 518178). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 3.0 TDI 240hp, CASA, 3L, Diesel. Engine #611 in our gains database.
- Power
- 295 HP+55 HP from 240
- Torque
- 625 Nm+75 Nm from 550
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 4L0907401A and software 518178.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | Q7 |
| Model year | 2008 |
| Displacement | 3.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 175.8 kW (239 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 4L0907401A |
| ECU software | 518178 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 2967 CC |
| Compression ratio | 17,0 : 1 |
| Bore × Stroke | 83,0 X 91,4 mm |
| OEM engine code | CASA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 240 HP | 550 Nm | — | — |
| Stage 1 | 295 HP | 625 Nm | +55 (22.9%) | +75 |
| Stage 2 | 310 HP | 650 Nm | +70 (29.2%) | +100 |
| Stage 3 | 360 HP | 853 Nm | +120 (50%) | +303 |
| Stage 4 | 432 HP | 1018 Nm | +192 (80%) | +468 |
About this calibration file
The Stage 1 calibration for the 2008 Audi Q7 3.0L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU and software version 518178. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 295 HP and 625 Nm at the crank — a gain of +55 HP (23%) and +75 Nm over the factory 240 HP / 550 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for Audi Q7 3.0 TDI CR 2008 Turbo-Diesel 175.8KW with Bosch 4L0907401A (Bosch software number 518178 ( 1037518178 )). The base stock vehicle for this calibration has a factory output of around 175.8 kW (~239 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 4L0907401A, 518178 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
092F4846 BA131EB1 3E702396 0D71B290 FF502844 561F515E 2F537638 4922E5D0