Original file
Original / Factory · Petrol · 55 TFSI (3.0T) 340hp
Audi A8 4.2 L original file Bosch HW 0261204759 · 4D0907558D · SW 357486
Audi A8 4.2 L Petrol 250.1 kW (340 HP) Original1998, Petrol, 250.1 kW (340 hp)
340 HP Factory calibration Stock backup file, 500 Nm, Petrol
Calibrated ECU file for 0261204759 (SW 357486). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 55 TFSI (3.0T) 340hp, CZSE, 3L, Petrol. Engine #544 in our gains database.
- Power
- 340 HPfactory calibration
- Torque
- 500 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261204759 and software 357486.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A8 |
| Model year | 1998 |
| Displacement | 4.2 L |
| Fuel / Induction | Petrol |
| Factory power | 250.1 kW (340 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 4D0907558D |
| ECU hardware | 0261204759 |
| ECU software | 357486 |
| Calibration stage | Original (Factory) |
| OEM engine code | CZSE |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 340 HP | 500 Nm | — | — |
| Stage 1 | 400 HP | 600 Nm | +60 (17.6%) | +100 |
| Stage 2 | 424 HP | 630 Nm | +84 (24.7%) | +130 |
| Stage 3 | 561 HP | 775 Nm | +221 (65%) | +275 |
| Stage 4 | 663 HP | 925 Nm | +323 (95%) | +425 |
About this calibration file
This is the factory (original) ECU calibration for the 1998 Audi A8 4.2L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261204759 and software version 357486. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261204759 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Audi A8 4.2 L 1998 Benzin 250.1KW with Bosch 0261204759 and software ID 4D0907558D (Bosch software number 357486 ( 1037357486 )). This original file corresponds to a factory engine output of approximately 250.1 kW (~340 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261204759, 4D0907558D, 357486 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
BE6C2ADF D0CEAFDB 1FDCBC1B 544E54B6 CA92E4F8 A6813D68 007EDFE0 622E91E2