Original file
Original / Factory · Diesel · 45 TDI (3.0D) 231hp
Audi A6 3.0 TDI CR DPF original file Bosch · 4F0907401E · SW 516638
Audi A6 3.0 TDI CR DPF Turbo Diesel 176 kW (239 HP) OriginalTurbo diesel, 176 kW (239 hp)
231 HP Factory calibration Stock backup file, 500 Nm, Diesel
Calibrated ECU file for 4F0907401E (SW 516638). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 45 TDI (3.0D) 231hp, 3L, Diesel. Engine #483 in our gains database.
- Power
- 231 HPfactory calibration
- Torque
- 500 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 4F0907401E and software 516638.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A6 |
| Displacement | 3.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 176 kW (239 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 4F0907401E |
| ECU software | 516638 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2967 CC |
| Compression ratio | 16,0 : 1 |
| Bore × Stroke | 83,0 X 91,4 mm |
| OEM engine code | 45 TDI (3.0D) 231hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 231 HP | 500 Nm | — | — |
| Stage 1 | 277 HP | 610 Nm | +46 (19.9%) | +110 |
| Stage 2 | 291 HP | 634 Nm | +60 (26%) | +134 |
| Stage 3 | 347 HP | 775 Nm | +116 (50.2%) | +275 |
| Stage 4 | 416 HP | 925 Nm | +185 (80.1%) | +425 |
About this calibration file
This is the factory (original) ECU calibration for the Audi A6 3.0L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU and software version 516638. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a complete original ECU backup (stock file) for Audi A6 3.0 TDI CR DPF Turbo-Diesel 176KW with Bosch 4F0907401E (Bosch software number 516638 ( 1037516638 )). This original file corresponds to a factory engine output of approximately 176 kW (~239 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 4F0907401E, 516638 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
6307F704 DBDDD311 78AC2DF4 3229C148 72BE4FA4 E7649954 9374CD06 35924A4C