Stage 4
Stage 4 · Diesel · 2.5 V6 TDI 150hp
Audi A6 2.5 TDI Stage 4 file Bosch HW 0281010148 · 4B0907401S
Audi A6 2.5 TDI Turbo Diesel 110.3 kW (150 HP) Stage 42002, Turbo diesel, 110.3 kW (150 hp)
150 → 270 HP +120 HP +264 Nm 80% more power
Calibrated ECU file for 0281010148 (SW 352644). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.5 V6 TDI 150hp, AKN, 2.5L, Diesel. Engine #10702 in our gains database.
- Power
- 270 HP+120 HP from 150
- Torque
- 574 Nm+264 Nm from 310
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281010148.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 4, Diesel.
Hardware
- Built / forged engine internals (rods, pistons)
- Large performance turbocharger
- Race-spec injectors and uprated fuel pump
- Race intercooler + uprated cooling
- Full performance exhaust (downpipe + catback)
- Reinforced clutch + uprated transmission cooling
- Optional: water-methanol injection
Software / calibration
- Fully bespoke calibration: typically dyno-tuned on installed hardware
- Fuelling rebuilt around race injectors / HPFP / E85 blend
- Boost, ignition / injection timing and lambda targeted to the build
- Closed-loop safeties retuned around the actual hardware envelope
Stage 4 is a fully built setup: figures shown are a typical envelope. The file is dyno-tuned to your specific hardware spec.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A6 |
| Model year | 2002 |
| Displacement | 2.5 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 110.3 kW (150 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 4B0907401S |
| ECU hardware | 352644-645 |
| ECU software | 0281010148 |
| Calibration stage | Stage 4 |
| OEM engine code | AKN |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 150 HP | 310 Nm | — | — |
| Stage 1 | 190 HP | 390 Nm | +40 (26.7%) | +80 |
| Stage 2 | 213 HP | 456 Nm | +63 (42%) | +146 |
| Stage 3 | 225 HP | 481 Nm | +75 (50%) | +171 |
| Stage 4 | 270 HP | 574 Nm | +120 (80%) | +264 |
About this calibration file
The Stage 4 calibration for the 2002 Audi A6 2.5L Turbo Diesel is a built-engine tune. It assumes forged internals, large-frame turbo, upgraded transmission or clutch, and a standalone pre-tune dyno pass. The file is meant as a safe starting map for a professional tuner's in-car refinement.
This file matches a Bosch ECU with hardware number 352644-645 and software version 0281010148. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 270 HP and 574 Nm at the crank — a gain of +120 HP (80%) and +264 Nm over the factory 150 HP / 310 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
352644-645 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage4 tuning file for Audi A6 2.5 TDI 2002 Turbo-Diesel 110.3KW with Bosch 0281010148 and software ID 4B0907401S. The base stock vehicle for this calibration has a factory output of around 110.3 kW (~150 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281010148, 4B0907401S. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E1159301 FC04A673 B659AB1D 6DC2A339 87C8ED55 0D1E995D 0040737F 98A94D78