Stage 1
Stage 1 · Petrol · 1.8 20v T 150hp
Audi A6 1.8T 20V Stage 1 file Bosch HW 0261206917 · 4B0906018CA
Audi A6 1.8T 20V Turbo Petrol 110.3 kW (150 HP) Stage 1Turbo petrol, 110.3 kW (150 hp)
150 → 200 HP +50 HP +110 Nm 33% more power
Calibrated ECU file for 0261206917. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.8 20v T 150hp, APU, 1.8L, Petrol. Engine #10707 in our gains database.
- Power
- 200 HP+50 HP from 150
- Torque
- 320 Nm+110 Nm from 210
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261206917.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A6 1 8t |
| Fuel / Induction | Petrol |
| Factory power | 110.3 kW (150 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 4B0906018CA |
| ECU hardware | 0261206917 |
| Calibration stage | Stage 1 |
| OEM engine code | APU |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 150 HP | 210 Nm | — | — |
| Stage 1 | 200 HP | 320 Nm | +50 (33.3%) | +110 |
| Stage 2 | 210 HP | 325 Nm | +60 (40%) | +115 |
| Stage 3 | 248 HP | 341 Nm | +98 (65.3%) | +131 |
| Stage 4 | 293 HP | 389 Nm | +143 (95.3%) | +179 |
About this calibration file
The Stage 1 calibration for the Audi A6 1 8t Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0261206917. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 200 HP and 320 Nm at the crank — a gain of +50 HP (33%) and +110 Nm over the factory 150 HP / 210 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261206917 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Audi A6 1.8T 20V Turbo-Benzin 110.3KW with Bosch 0261206917 and software ID 4B0906018CA. The base stock vehicle for this calibration has a factory output of around 110.3 kW (~150 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261206917, 4B0906018CA. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
F8B8FE24 8E4AD5A2 94E2FC2C 9C3A1D4F 35D3CE70 A193C02C 5F9EBB39 F776ECE4